Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Gears and Gearcases - Assorted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • KONNY Generation II Gear Cases

    Hello Racers;

    Inexpensive KONNY Generation II Gear Cases for only $1195.00. Immediate shipment of Konny 14:15, and 15:14 O/D Gear Cases. One month shipment of ratio's: Big Gear 14:14, 12:15, 11:15, and Small Unit 11:15, and 12:15.
    .................................................. .............only $1195.00

    Jim McKean
    E-Mail: captainjimmckean@yahoo.com
    Phone: (214) 577-5644

    Comment


    • KOMATO Gear Case Owners

      Hello KOMATO Owners;

      We had as many as 50 Komato Gear Cases, racing at several venues, this weekend. I have had NO reports of any KOMATO mechanical failures. We have had many compliments on the excellent handling, the great turning ability, and the ability to run the unit very high. However, we did have two or three drivers say the Komato wasn't allowing sufficient water flow for proper engine cooling. This may be an isolated rigging problem, or a Komato problem. Further testing and evakuation will take some time, so I've drawn up a couple idea's (attached) that should get plenty of water cooling to your engine. I solicit your ideas and constructive criticism.

      Jim McKean
      E-Mail: captainjimmckean@yahoo.com

      Dudley Malone
      E-Mail: centralmarineco@yahoo.com
      Attached Files

      Comment


      • Not rigging

        It is not a rigging problem. I burnt up the best motor I ever had. we reworked the water holes and the lower unit watered fine after that. I will say I love this lower unit so far. It handled really good. I highly recommend this unit but DO NOT use it as it comes from the factory.

        Comment


        • Komato Lower unit

          We were the first ones out with one at the NBRA race in Alexandria, LA. We also burned up a new 44. After everyone saw this they drilled theirs out and they worked great.
          Keith Kampen

          Comment


          • KOMATO: Thank you Steven Sawyer & Keith Kampen

            Hello Racers;

            After up to 50 Komato's ran this weekend, it became painfully obvious some MODIFIED Engines require a lot more cooling capacity, than smaller dispacement PRO Engines. Initial testing on PRO 700cc engine, up to 115mpg, showed Komato "Watered" good, but this weekend some MOD's found otherwise. "Field Testing" is best to solve problems, but in the interim, I've drawn up a "Fix" that should immensely increase watering capacity.
            Keep your thoughts coming.

            Jim McKean
            E-Mail: captainjimmckean@yahoo.com

            Dudley Malone
            E-Mail: centralmarineco@yahoo.com
            Attached Files

            Comment


            • KOMATO "Hatchet" Gear Cases in stock

              Hello Racers;

              KOMATO had a good weekend, with up to 50 Komato's running, many won races, and all drivers reported great handling. turning ability, and being able to "jack the engine up high". No blown units, no mechanical failures. Two MOD drivers got inadequate cooling to their Big Mod Engines, and this problem has already been solved.
              Komato DEMAND is starting to excede supply, so don't wait if you want one this season.
              Available KOMATO "Hatchet" Big Gear Ratio's: 15:14, 14:14, 14:15, 12:14. 12:15, 11:15....................$1465 + $35 Air Frt

              Jim McKean
              E-Mail: captainjimmckean@yahoo.com

              Dudley Malone
              E-Mail: centralmarineco@yahoo.com

              Comment


              • luv to know when someone runs it under a 3 holer??? with prop over 8" dia thanks...

                Comment


                • KONNY Gear Case Best Price

                  Hello Racers;

                  I have KONNY Gear Cases in stock. Lowest prices on Racing Gear Cases.
                  In Stock:
                  KONNY 15:14 O/D......$1195.00
                  KONNY 14:14............$1195.00
                  KONNY 14:15............$1195.00

                  Jim McKean
                  E-Mail: captainjimmckean@yahoo.com

                  Comment


                  • KOMATO Picture of enlarged water inlet

                    Hello KOMATO Owners;

                    "A picture is worth a thousand words", so here's a picture of what we recommend to MOD drivers requiring increased water cooling capacity, out of their KOMATO Gear Case.


                    Jim McKean
                    E-Mail: captainjimmckean@yahoo.com

                    Dudley Malone
                    E-Mail: centralmarineco@yahoo.com
                    Attached Files

                    Comment


                    • Jim, Dudly has pictures of the unit I worked at the race in Alex, Much easier than what you show, and the hole in the front isnt really needed. My 3 holer looked like a fountain,just as it started to plane out
                      Jeff

                      Comment


                      • Hi Jeff

                        The "Fix" I showed picture of might have been an overkill. Thanks for your input. I'll wait to see Dudley's picture. Thanks very much for your input.

                        Jim McKean

                        Comment


                        • Jim let me Know what you think of the mods I did on the unit, I loved the unit, the handling was superb, and i am 1/8 above the tru bottom of the hydro, I just now have to find the right prop
                          Jeff

                          Comment


                          • Jeff/Komato

                            Thanks for the input, Jeff.

                            What's your E-Mail address?

                            Jim
                            Attached Files

                            Comment


                            • Jim, what I did was to groove the fornt hole all the way to the nose and groove the back hole all the way to the fornt hole. It seemed to be enough but I might go ahead and put the front hole in there. these mods will definitely make this the best unit out there.

                              Comment


                              • KOMATO Testimonials, April 22, 2010

                                Hello Racers;

                                See what happy Komato Gear Case customers are saying about the revolutionary new Komato HATCHET Gear Case. 15:14 Overdrive, 14:14, 14:15, 12:14, 12:15, and 11:15...................................$1465.00

                                Jim McKean
                                E-Mail: <captainjimmckean@yahoo.com>

                                Dudley Malone
                                E-Mail: <centralmarineco@yahoo.com>
                                Attached Files

                                Comment

                                Working...
                                X