Gears and Gearcases - Assorted

[Jim McKean]

Flex Driveshaft

Hi Racer;

I've never seen Sid Bass's Flex Driveshaft. Our Komato "Flex Driveshaft" is our own design, and race tested....130mph with a 40 cu. inch engine.

Our KOMATO 1:1, 15:14 O/D, and 14:15's are here, ready to WIN your first race this year.

Jim McKean
E-Mail:"captainjimmckean@yahoo.com"

Dudley Malone
E-Mail:"centralmarineco@yahoo.com"

[pro350hydro]

Hi Racer;

I've never seen Sid Bass's Flex Driveshaft. Our Komato "Flex Driveshaft" is our own design, and race tested....130mph with a 40 cu. inch engine.

Our KOMATO 1:1, 15:14 O/D, and 14:15's are here, ready to WIN your first race this year.

Jim McKean
E-Mail:"captainjimmckean@yahoo.com"

Dudley Malone
E-Mail:"centralmarineco@yahoo.com"

Were you guys running this new flex shaft at the Kilo's? I heard you tore up a set of gears at the Kilo's...Were they Komato's?

[Jim McKean]

Yes, we ran flex shaft at Kilo's. We set 130mph 700 Hydro, and 126mph 1100 Hydro with prototype 15:14 KOMATO Gears. We did lose a set of used Konny 14:14 gears testing in very rough water. If you were there, Sean was in "White Caps" when it happened. The KOMATO 14:14 Gears coming in Komato's is a much stronger material, and longevity shouldn't be a problem.

Also, Sean ran a set of prototype Komato 14:15 gears 24 heats under a 700cc VRP putting out well over 200hp, and the gears are still fine.

Jim McKean
E-Mail: captainjimmckean@yahoo.com

[pro350hydro]

Do you have any pictures of the flex shaft? Who's making the Komato gears and case? Sure is a nice looking unit

[brian]

We need 6 more deposits to start the project! 10 deposits is all that is needed to start the project here is where to send your money. If we do not get ten they will not be made. Some have to sell first so he can stock the shelves for you pay as you break it people.

Send 200 per set and yes if you buy 2 sets it counts towards the 10 needed to start the project. Don't be that guy! Consider it a payment plan! Call frank if you have to use paypal but a check or MO is best.

PROJECT MANAGER: Frank Erion (772) 398-0522 has successfully reproduced and made available Mercury straight cut 16:21 gears and Mercury straight cut 15:16 gears.

SEND DEPOSIT TO: Frank Erion, 3243 SE River Vista Dr., Port St. Lucie, FL 34952. Please specify desired shipping address.

[Jim McKean]

KOMATO 1:1 finally here

Today, we received our first shipment of KOMATO 14:14 "Hatchet" Gearcases.
And we actually have 2 unsold units......hurry, hurry!!!!!!


Jim McKean
E-Mail: captainjimmckean@yahoo.com

Dudley Malone
E-Mail: centralmarineco@yahoo.com

[Jim McKean]

Yamato Hatchet GEARSET's Update

I will have "drop-in" Gearsets for Yamato "Hatchet" Gearcases very soon. Gear ratio's 14:14, 14:15, 12:15, and 11:15. Stay tuned!

Jim McKean
E-Mail: captainjimmckean@yahoo.com

[Jim McKean]

YAMATO Hatchet Gearsets for this year!!

Hello Racers:

As promised, we will have replacement gears for Yamato "Hatchet" Horizontal Split Gearcase this racing season. My investment is substantial, so quantities are limited. Gear Ratio's 14:15, 12:15, and 11:15. Price is $465/set. Send $50 deposit to secure your order. Send to:
Jim McKean
175 Ridgepoint Drive
Livingston, Texas 77351

Jim McKean
E-Mail: captainjimmckean@yahoo.com
FONT="Impact"][/FONT]

[Jim McKean]

Yamato 14:15 gearsets first to come

Hello Racers;

14:15 Gearsets for Yamato Hatchet Gearcase are first to come; available very soon. Gear ratio's following 14:15 are 14:14, 12:15, and 11:15. A $50 deposit puts you on list, in order received.

Jim McKean
E-Mail: captainjimmckean@yahoo.com

Dudley Malone
E-Mail: centralmarineco@yahoo.com

[modifiedoutboard]

email

Never get email response?
Wanted to do the 2009 rain check.
Anthony McCulloch

[Jim McKean]

Komato 14:14

Hello Anthony;

I try to answer all e-mails ASAP. I don't remember one from you, but we'll try again. We do have Komato 14:14's in stock.

Jim McKean
E-Mail: captainjimmckean@yahoo.com

[Jim McKean]

YAMATO "Hatchet" Gearsets

Hello Racers;

YAMATO "Hatchet" Gearsets are being made in next 3 weeks. We will have them available in May. Get your $50 deposits in quickly to get on the list.

Jim McKean
E-Mail: captainjimmckean@yahoo.com

[Jim McKean]

KOMATO "Hatchet" Geacase Update

Hello Racers;

We now are catching up with unprecedented sales of KOMATO "Hatchet" Big Gear Gearcases. In stock for immediate delivery: 15:14, 14:14, 14:15, 12:15, and 11:15. Brand new Komato 12:14's in May, with first two going to Mike Krier, and Jack Kugler.
Also, Yamato "Hatchet" Gears available in May.

Jim McKean
E-Mail: captainjimmckean@yahoo.com
Dudley Malone
E-Mail: centralmarineco@yahoo.com

[Jim McKean]

VRP, ROSSI, TIETZE, KONNY Gearcase SALE

Hello Racers;

VRP, ROSSI, TIETZE, KONNY, YAMATO, Gearcase SALE!!!

Our Race Team, Sean McKean, will be using, exclusively, KOMATO Gearcases in 2010. We have a big supply of VRP, ROSSI, TIETZE, YAMATO Gearcases to sell, some brand new, some with very little use. Save BIG on these!!

Jim McKean
E-Mail: captainjimmckean@yahoo.com
Phone (214) 577-5644

[Jim McKean]

YAMATO "Hatchet" 14:15 Gearsets

Hello Racers;

Good News!! Yamato "Hatchet" 14:15 drop-in gearsets will be available, for delivery, in May 2010. Yamato 14:15 gearsets will be followed by ratio's 12:14, 11:15, 12:15. This is not a one time project, but I will continue to stock these Yamato Gears for years to come. I can immediate deliver Yamato propshafts, seals, bearings, etc., and will for years to come. See the attached drawing. Production is already underway. Send $50 deposit to save your slot.

Jim McKean
E-Mail: captainjimmckean@yahoo.com
Phone (214) 577-5644