New boats for 2008?

[modhydro]

Sponsons

Daren,

Those are the same ones I've been doing for quite a time now. The steps add quite a bit of strength and help unstick them when planing off and if they ever touch. I also do multiple bevels to make the boats more forgiving in the turns.

You probably can't see it in the background but your fin is in progress on the bench.

Steve

[mercguy]

ah.........

Daren,

Those are the same ones I've been doing for quite a time now. The steps add quite a bit of strength and help unstick them when planing off and if they ever touch. I also do multiple bevels to make the boats more forgiving in the turns.

You probably can't see it in the background but your fin is in progress on the bench.

Steve

I guess it just looks deceiving from the pictures. It looks more like a "tunnel" or "relief" built into the bottom of the sponsons..........

[G Stillwill]

Kyle is doing a great job on his boat glad to see kids with an interest in something constructive and learning at the same time. Here is the new AXSH/ASH ready to rock.

[Matt Dagostino]

George.......................

Val Pal and I just checked out the new digs. She loves the STARS on the air wings!! Jeez, look what you started now.

Matt

[G Stillwill]

Matt tell Val I will make her a set of stars they are 3M reflective to and glow in the dark

[mercguy]

Kyle is doing a great job on his boat glad to see kids with an interest in something constructive and learning at the same time. Here is the new AXSH/ASH ready to rock.

boy, I hope that new boat is for Val George or you are gonna worry me (pink for you) ??

ready to go??? Don't ya need something to squeeze???

PS: is that Betty Boop on the cowl?

[G Stillwill]

The pink is a speed secret good for a mile an hour The throtle is radio controled servo on the motor and pistol grip transmiter on the floor. Betty Boop never looked this good

[Matt Dagostino]

George.................

The pink is a speed secret good for a mile an hour The throtle is radio controled servo on the motor and pistol grip transmiter on the floor. Betty Boop never looked this good

George
Got the throttle sitting on the bench for you!! Who the hell is Betty Boop?? Is that someone from Yahoo Personals?? Lol.

I told Val about the Stars and she is all fired up!

Call ya later!

Matt

[mike ross]

George your a shoe in for the Miss Vicky Team with those colors. Boat looks great keep up the quailty work. Mikey

[Jeff Akers]

I have had a JDS CSH kit here for over a year now and have not even started building it (it looks very hard!).

Dude, don't be afraid, go for it !.....heck , If I can build one , anyone can

[crankbearing]

New Dsh

Here is a couple shots of a Scottcraft DSH I am builiding for a driver in Michigan. Flipped over this morning. I left the cockpit sides nice and High - Just to be safe Ya Know -

[bill boyes]

I like the way you dovetailed the Cockpit sides. If there a jig available to do that? JDS does the same thing.

[crankbearing]

by hand

Hi Bill,

You will laugh, but my Mom runs a daycare and she has the whole living room floor covered with this interlocking mats and it just so happens that the interlock is that of a puzzle joint. So I set the mat onto the plywood and scribe the lines in with the mat as the template and then rough cut with a dremel and finish with a coping saw and round file. It works great I cannot find a jig for doing full joints on the flat like we do in our boats.

Regards,

[bill boyes]

Gotta use what is available, Would be nice to have a fixture and use a router like a dovetail jig.

[driser]

Pink?

George,

Looks magenta to me! Nice looking boat.

D. Riser