Announcement

Collapse
No announcement yet.

Shear Pins

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Shear Pins

    Need a source for 5mm shear pins.

  • #2
    I been getting shear pins from Rex Hall for years for my PRO equipment because they don't break unless I abuse them!

    Comment


    • #3
      Art, you need to call Dirty Ernie LaRoe and see if you could get some of those good McDonald Douglas rivets. Just remembering the good ole days!

      Comment


      • #4
        How many do you need ? I have some

        Comment


      • #5
        We make ours from this hardened stainless rod and have had great luck with it. McMaster Carr 3821T101. It is $23 for a 3' length.....


        https://www.mcmaster.com/3821t101


        Steve



        Comment


        • #6
          Take a look here. There are rivets, shears, bolts. Great place. Run on Tohatsu, strong.
          aircraftspruce.com

          Comment


          • #7
            How about McMaster-Carr's 1080 Spring Steel Wire? We use PN 8907K18 - comes in 1 foot lengths. Yes, it is only 3/16" diameter, but it works well with my 5mm props and prop shafts in D Mod. It is 261,000 psi tensile strength!
            Fred Hauenstein

            Comment


            • #8
              Thanks all, got it taken care of.

              Comment

              Working...
              X