Shear Pins

[Art K]

Thanks all, got it taken care of.

[Fast Freddie]

How about McMaster-Carr's 1080 Spring Steel Wire? We use PN 8907K18 - comes in 1 foot lengths. Yes, it is only 3/16" diameter, but it works well with my 5mm props and prop shafts in D Mod. It is 261,000 psi tensile strength!

[MTS71R]

Take a look here. There are rivets, shears, bolts. Great place. Run on Tohatsu, strong.
aircraftspruce.com

[modhydro]

We make ours from this hardened stainless rod and have had great luck with it. McMaster Carr 3821T101. It is $23 for a 3' length.....


https://www.mcmaster.com/3821t101


Steve

[M Miner]

Art you can email me at waterski.mm@gmail.com

[M Miner]

How many do you need ? I have some

[mark40h]

Art, you need to call Dirty Ernie LaRoe and see if you could get some of those good McDonald Douglas rivets. Just remembering the good ole days!

[PETEG]

I been getting shear pins from Rex Hall for years for my PRO equipment because they don't break unless I abuse them!

[Art K]

Need a source for 5mm shear pins.