Meed Some One To Machine Swivel Houing

[mercmack]

Need Some One The Machine A Swivel Housing Of A Stock 25 Hp Merc To Fit A 44xs Housing..also Looking For The 25xs Adapter To Fit The 44xs Tower..thanks:d:d

[David_L6]

I don't know.............

Have you talked to Dave Scott? He may be able to do what you want. He builds stock 44XS motors. I think he does some 25XS stuff also. I race mods so I don't know who all works on stock stuff but I'd give Dave a call if I were wanting to do what you are wanting to do since it's Merc stuff.

[mercmack]

Machine Work

Thanks L6, I Tryed Him, But When I Sent It..the Canada Gov Wanted Another 106.00 Dollars Duty Tax..so It Cost Me Double Ups Frieght And No Work Done ,for Scott Would't Pick It Up...fact Its Still In The The Box With Check For The Labor That Scott Wanted...so I Am Out 50 Dollars And Still No Work Done..i Dont See How He Can Make Any Money From The U.s.

[A/B Speedliner]

Machine work

Try Doug kay he may be able to help you. His cell phone number is 586-212-5917. If you want to see some of his work visit our web site at www.aeroliner-boats.com.

[Dave Young 94-N]

I have the 25 / D swivel brackets in stock. Shortened and equipped with oilite bushings by Alan Akerstrom. Either you can get one we have in stock and send us your un-machined one for exchange - 150.00 or we'll send you one without an exchange for 200.00 or you can go direct to Alan.

Tad Olsen (IAIPerformance.com 815-226-7735) has the housing adapters. We install the exhaust tubes (to spec length and diameter), water tubes, grommets and gaskets. I don't know if the D down housing is the exact same as the 25 but Tad will.

Any questions I can be contacted at boatguydave@optonline.net or 631-722-3160

[Jeff Brewster 59s]

I was able to see some of Alan's work first hand two weeks ago. These are better than the originals! Excellent workmanship.