Were do I get tuned pipes from???

[Damo]

Hi all
I'm looking for somone to supply me with a tuned pipe for an 429cc two stroke motor is there suppliers out there that can give me some advice?
Thanks
Damien
damo@onthenet.com.au

[PETEG]

go to your local library and have them order you a book titled:
Two Stroke Tuner's Handbook
i dont remember the author, but it will give you the basic numbers to build a set of pipes

[Damo]

Pipes

Thanks for your tips I'll have a look today
Cheers
Damien

[T Chance]

go to your local library and have them order you a book titled:
Two Stroke Tuner's Handbook
i dont remember the author, but it will give you the basic numbers to build a set of pipes

The book is by Peter Jennings. It is out of print, it may be at your library, or used bookstore. However, you can also download it at: http://edj.net/2stroke/jennings/

[Damo]

Tuned pipes

Thanks for the tips I have had a look at the book it's just what I needed
Thank you
Damien

[machinedcomp]

Expansion Chambers

Damo,
Once you have your design established. You could have someone else build it for you. I use Gary Williams In Neveda (formerly with Aircone) He will build it to your print. He does excellent work and he's reasonably priced.
If interested send me a message and I'll give you his number.

[PETEG]

or Gary might build you the cone shapes and you can weld them up yourself

[Damo]

Pipes

Thanks for that
if you could pass on his number that would be good. I live in Australia but I get alot of my race gear from the states any way
Cheers
Damien

[Damo]

Hydro to suit 550cc???

While i'm on the forum the reason for the pipe details all this is for a new class I want to run (open hull 550cc class) Here in Oz there is only tunnels and mono's but I'm realy keen on running one of the hydro's you guy's race. Can any one reconmend a good kit and size that I could build on this side of the pond???
Thanks
Damien