WTB Coaming Pulley but Which One?

[Dennis Crews]

I want to buy one coaming pulley to match the one I currently have but I am not sure which to buy. The one I am trying to match is black with a sanded aluminum ridge down the center so it looks to me like a Keller brand.

But....

How do I tell if it is 15 degree or 90 degree base? From where is that measurement taken?

Also, the one pulley I have appears that it would be different left to right as only one side of the base has a drainage notch. But, when I look at the suppliers websites I do not see the pulleys listed as left or right side.

Any help in pointing me in the right direction would be greatly appreciated!


Dennis

[Jack Stotts]

Dennis, place the mounting surface against a flat surface and look at the pully it self. Is the pully tilted up or down from perpindicular to the surface or straight out. If tilted, it's a 15 degree and if not, it's a 90 degree. Only the 15degree ones matter on which side of the boat you mount it. Jack

[mdaspit]

Contact Steve at Portage Bay Systems. See the ad at the top of this page.

[blueskyracer]

Tom Cronk also carries all of the Keller equipment

[Tom Cronk]

Pulleys

Dennis
Send me a picture of the pulley you have.
Tom
tcronk@tampabay.rr.com

[Dennis Crews]

Dennis
Send me a picture of the pulley you have.
Tom
tcronk@tampabay.rr.com

Pic sent. Thanks Tom

Dennis

[doc 35-0]

Dennis, Hope you can help us in the pits on Sat. June 23. We need a weight Master. Our scales are on the ground and all you do is read the scales.

[joejohn44]

Dennis, Hope you can help us in the pits on Sat. June 23. We need a weight Master. Our scales are on the ground and all you do is read the scales.

If I catch him driving by my house, I'll drag him kickin' and screamin', Doc!!

[john527]

we made our own, the looks add 3 mph to the boat!!

[Dennis Crews]

If I catch him driving by my house, I'll drag him kickin' and screamin', Doc!!

Yep, I'll be there Fri and Sat and willin' to pitch in and help. Might have one or two more able bodies with me too.

[Dennis Crews]

we made our own, the looks add 3 mph to the boat!!

That does look nice. If you can verify that 3 mph I'd bet you'd sell a boat-load of 'em!

[Tom Cronk]

Picture

Dennis
I havn't received the picture yet,just your email.
Tom

[Dennis Crews]

Here are the pics. Sorry Tom but my email account has some serious size restrictions on attachments and I have not yet figured out how to resize the pics so I posted them here.

[Dennis Crews]

Dennis, place the mounting surface against a flat surface and look at the pully it self. Is the pully tilted up or down from perpindicular to the surface or straight out. If tilted, it's a 15 degree and if not, it's a 90 degree. Only the 15degree ones matter on which side of the boat you mount it. Jack

Thanks Jack, by the pic above (if I am smart enough to understand your instructions) it looks to me like I have the 15 degree base.

Look forward to seeing you at Mc Alester

Dennis

[Jack Stotts]

Looks like a 90 degree to me but with a little slop in the pulley shaft. Tom will know. Jack