Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Kevlar Needed!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Kevlar Needed!

    New racer ASH...5'10 aprox. 180lbs. looking for Kevlar? Contact Earl Desiato via private message. Thank you!
    Earl 11 J........ Dangerous when Wet Runne Craft- Earl said, " Driving a Runne Craft is like Cheating". Dude, ........ Where's My Boat!

  • #2
    Braxton Miller has grown to six feet and is out grown his safety suit. He has yellow Jacket, sleeves and near new black pants. This will fit a person 5 ft six to 5 ft. seven. He begin wearing it when he was 11 years old and four foot something. 600 dollars + shipping. 19187911733. Doc Miller

    Comment


    • #3
      Looking for a fuel tank for an ASH. Needs to be mounted outside the boat. Have a new TALL ASH driver and he needs to get get back further in the boat.
      bill b

      Comment


      • #4
        I took card board and masking tape and put together a tank, then took the model to a welding shop and they built it like my model. It cost alittle more but you get the design that is yours. I mounted it next to the motor and not on the side, where it will interfere with the air flow. Jegs sells a threaded unit with a good top, that is welding at the top.
        Doc Miller

        Comment


        • #5
          Not Kevlar, aluminum

          Bill Boyes-

          He has what you need.

          http://www.hydroracer.net/forums/sho...highlight=tank
          DAVEY 18w

          Comment

          Working...
          X