Tweet
I have 3 CSH boats for sale, need to keep one to race this year so the first two to sell are it, you all have the choice of boat.
1. Is the last boat to come out of the Arltralite molds in the northeast, completed summer of 2006. It is slightly modified from the Arltralite design. It has a 76" afterplane, 38" bottom, and decks are slightly different from the Arltralites. Boat weighs approximately 95lbs with hardware (all composite). It could be used as a 20ssh/CSH/BMH (350ccmh). It is currently set up as a kneeldown but was originally run as a laydown. I will include the ramp for the laydown format and it would take two days to convert back to a laydown. Looking for $1500 USD without hardware.
2. I built this boat last summer and finished it in the fall. Some saw this boat at Gravenhurst, ON, Erinsville, ON, Crystal Lake, NY, Dunnville, ON, Kingston, NH and Haverhill, MA this year. It has a 37" bottom, transom and is cut for a Y302 but has an extention for a Y102. Can be used in CSH/BMH (350ccmh)/CMH (500ccmh). Weighs 105lbs with hardware and paint. The boat is all wood with carbon reinforcement to the bottom and right cockpit side. Looking for $1750 USD with minimal hardware (handles, transom plates, turn fin bracket) and it totally painted. (SOLD)
3. I am in the process of completing this boat. It has a 36" bottom, 76" afterplane, composite bottom and frames, the rest is wood. The boat is finished but needs paint. The boat can be used for 20ssh/CSH and BMH (350cch). I'm asking for $1750 USD for it with no paint and no hardware.
Again, you have a choice of all 3 boats but after the first 2 are sold I am keeping the last one. You can contact me by e-mail at stu_racer@hotmail.com
I am located in south-eastern Ontario and will be willing to help with delivery within a reasonable distance.
1. Is the last boat to come out of the Arltralite molds in the northeast, completed summer of 2006. It is slightly modified from the Arltralite design. It has a 76" afterplane, 38" bottom, and decks are slightly different from the Arltralites. Boat weighs approximately 95lbs with hardware (all composite). It could be used as a 20ssh/CSH/BMH (350ccmh). It is currently set up as a kneeldown but was originally run as a laydown. I will include the ramp for the laydown format and it would take two days to convert back to a laydown. Looking for $1500 USD without hardware.
2. I built this boat last summer and finished it in the fall. Some saw this boat at Gravenhurst, ON, Erinsville, ON, Crystal Lake, NY, Dunnville, ON, Kingston, NH and Haverhill, MA this year. It has a 37" bottom, transom and is cut for a Y302 but has an extention for a Y102. Can be used in CSH/BMH (350ccmh)/CMH (500ccmh). Weighs 105lbs with hardware and paint. The boat is all wood with carbon reinforcement to the bottom and right cockpit side. Looking for $1750 USD with minimal hardware (handles, transom plates, turn fin bracket) and it totally painted. (SOLD)
3. I am in the process of completing this boat. It has a 36" bottom, 76" afterplane, composite bottom and frames, the rest is wood. The boat is finished but needs paint. The boat can be used for 20ssh/CSH and BMH (350cch). I'm asking for $1750 USD for it with no paint and no hardware.
Again, you have a choice of all 3 boats but after the first 2 are sold I am keeping the last one. You can contact me by e-mail at stu_racer@hotmail.com
I am located in south-eastern Ontario and will be willing to help with delivery within a reasonable distance.
Comment