World Championship 0175

[Steve77t]

Get a real chance at winning in 0175 with a VRP 175 engine. These motors won Last year 2009 World championship with at least a 3 second per lap margin over competition. In stock now while Euro is lowest since 2007 at 5000 dollars for powerhead with UIM exhaust. Thanks Steve

[Steve77t]

Euro Is very low now, This is a prime time to purchase

[QUINAULTRACING]

one or two

Is it a signal or a twin cylinder ?

[Steve77t]

Is it a signal or a twin cylinder ?

All VRP Motors are Twin cylinder for 0175 class. Thanks Steve

[QUINAULTRACING]

Gear case and tower

Does VRP make their own gear case and tower? What ratio gear case?
Thanks Steve

[Steve77t]

Does VRP make their own gear case and tower? What ratio gear case?
Thanks Steve

Yes they make a complete motor with tower and unit. gear ratio's are for small case 12:16 11:15 11:16 and 11:17. You can get any ratio with order that you want. Motor that I have in stock is a powerhead with carbs and exhausts (UIM Type) so price will be more for unit and tower. tower also maybe purchased with the lift system for jetty start. Thanks Steve

[Steve77t]

[QUINAULTRACING]

boat and speed

Steve,
In 175 what size hull do you need and what kind of speed can you get out of the 175? Thanks Steve 22-R

[Composite Specialties]

Steve,
In 175 what size hull do you need and what kind of speed can you get out of the 175? Thanks Steve 22-R

12' Euro style would be the best option

[Steve77t]

Steve,
In 175 what size hull do you need and what kind of speed can you get out of the 175? Thanks Steve 22-R

Hi Steve, We/ The driver that uses my 175 motor, uses a boat about 11'4'' to 11'6''. I have seen some larger boats but because I'am not a hydro guy, (runabouts for me) I will have to say what my driver uses is good. Speeds are in mid to upper 80's. This combination is really a nice set up, and is fast as many races have been won in 175 with my driver. Thanks Steve

[T Chance]

Steve - Kind of off the subject, but do the 11:17 gears fit into a Konig gearcase, Thanks, Tim Chance

[QUINAULTRACING]

Style

Steve,
Is that a Euro or pickle fork style hull? If pickle fork what size after plane?
Thanks Again Steve 22-R

[Steve77t]

Steve - Kind of off the subject, but do the 11:17 gears fit into a Konig gearcase, Thanks, Tim Chance

Hi Tim , Yes they will work as these gears are small type

[Steve77t]

Steve,
Is that a Euro or pickle fork style hull? If pickle fork what size after plane?
Thanks Again Steve 22-R

It is a semi Euro type but I know he has made changes since boat was new. As far as measurements go, I know nothing of this and I won't BS you to thinking that I know. Steve

[QUINAULTRACING]

Thanks

Steve,
Thanks for information. I have a project going and that 175 is just a little too big. Sounds like that 175 would need a very light d-mod hull. Right know the stock Ds are just starting to hit 80 mph.
Thanks Steve 22-R