Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Dewald prop for sale

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dewald prop for sale

    Ran on a 44xs will also work good on a 25xs. great shape # P-23 size 7 1/4 x 12 1/2. Asking $250 o.b.o.
    Attached Files
    Team
    Main
    Racing

  • #2
    bump up
    Team
    Main
    Racing

    Comment


    • #3
      Would this prop work on 25ss as well?



      Comment


      • #4
        Dewald prop

        Originally posted by beshears View Post
        Would this prop work on 25ss as well?
        It might. Depends how the pitch was measured. Is it average across the blade at a specific radius? The diameter might have to be cut a bit. I ran a
        25ss on a hydro in the 70's and the prop was 7-1/8" dia x 11.8" pitch average at the 2" radius. Revs were about 7000. Might be worth a try.
        "Keep Move'n" life is catching up!
        No man's life, liberty or property are safe while the legislature is in session.

        Comment


        • #5
          to the top
          Team
          Main
          Racing

          Comment


          • #6
            Prop

            I will buy it if you still have it. Will it fit a Quicksilver Lower Unit(5/8" shaft)?
            Please reply to drtracy.1@netzero.net.

            Dr. Tracy Baker

            Comment


            • #7
              [QUOTE=Dr. Tracy Baker;158197]I will buy it if you still have it. Will it fit a Quicksilver Lower Unit(5/8" shaft)?
              Please reply to drtracy.1@netzero.net.

              Measure that prop shaft again.
              It should be 11/16" diameter, not 5/8", unless some one has cut it down. [not good practice]
              It could have been cut down to 15mm
              to suit the metric European props.
              Brian Hendrick, #66 F
              "the harder we try, the worser it gets"



              Comment


              • #8
                [QUOTE=bh/;158215]
                Originally posted by Dr. Tracy Baker View Post
                I will buy it if you still have it. Will it fit a Quicksilver Lower Unit(5/8" shaft)?
                Please reply to drtracy.1@netzero.net.

                Measure that prop shaft again.
                It should be 11/16" diameter, not 5/8", unless some one has cut it down. [not good practice]
                It could have been cut down to 15mm
                to suit the metric European props.
                --------------------------------------------------------------

                11/16" or 5/8" dimensions not correct if you are referring to the Quicksilver gear foot used in the A, B class for the KG4, KG7, 20H and the 25ss class that used first vintage 1973 - 1982(?) Merc 25ss engines, all these came with a 9/16" prop shaft ID. Not sure what prop shaft ID is in the 25xs engine that followed the 25ss.
                "Keep Move'n" life is catching up!
                No man's life, liberty or property are safe while the legislature is in session.

                Comment


                • #9
                  D/850 props are often interchanged with 25 & other Mercs using 16:21 gears ...


                  USING A BUSHING to adapt for the different prop shaft size.

                  An adapter bushing should be in every 16:21 racer's tool or prop box

                  Comment


                  • #10
                    sold sorry.
                    Team
                    Main
                    Racing

                    Comment

                    Working...
                    X