Yamato 302 tail-cone.

[drbyrne55]

Looking for a used "tail cone" for a 302 gear case.

Thanks

[QUINAULTRACING]

Yes

I have two or three. Let me take a look to see if one of them can be used in the APBA. By the time anyone sends me a gear case to work on 99% have damage to the tail cone. The price for a new tail cone is almost the same price as a complete gear case from Japan. Steve

[drbyrne55]

I have two or three. Let me take a look to see if one of them can be used in the APBA. By the time anyone sends me a gear case to work on 99% have damage to the tail cone. The price for a new tail cone is almost the same price as a complete gear case from Japan. Steve

Thanks Steve for looking.

Dan

[QUINAULTRACING]

No

Dan the used ones I have would not pass APBA inspection. In new I have, a tail cone and bearing, input shaft, prop shafts both sizes, gears, a few shims, seals, a Tietze nose cone and some bearings. Steve

[bill boyes]

Why would it not pass inspection? I do not think that there is a measurement on the tail cone. Some tail cones get beat up trying to remove a prop that has gotten stuck on the prop shaft.

[seanp3]

Steve, pm me your phone number. thanks