Does anybody know where i can get a decently priced 38mm mikuni carb with a power jet kit installed? I would be using this carb on a 125 cc rossi hydro.
Unconfigured Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
mikuni carb with power jet wanted
Collapse
X
-
38MM Mikuni History
The 38MM carb mentioned in the earlier post has proper jetting in it now and was run on both Rossi and VRP engines that Tim Brinkman won National and World titles with. When the boat and motor were sold I only sold one carb with the rig. This was the spare and ran interchangerably with either engine. Unless jetting has changed radically on the engines sold in the last several years because of other design changes, this carb should fit right on and run without problems. Suit yourself as to your time frame. I have not been actively trying to sell it, but answered your quiry when you posted.
Comment
-
a power jet is basically another jetting system included with most mikuni carbs used on outboard hydros and runabouts. It is found on the front face of the carb itself, and overall, it is used to lean out the air to fuel ratio mix when the engine itelf is running at full throttle.GO FAST TURN LEFT!!!
Comment
-
Originally posted by hydroboyv9 View Postit is used to lean out the air to fuel ratio mix
You may want to do some more research on thisSattler Racing R-15
350cc Pro Alcohol Hydro
TEAM VRP
The Original "Lunatic Fringe"
Spokane Appraiser
Comment
Comment