Mercury gear foot

[blueskyracer]

Anyone out that can rebuild my Mercury foot.. I believe the water pump is pretty much shot

[JBM]

Not much to changing out an impeller Mike. Just spin the cone but off and it's right there. The merc tool works great, but I've had good luck using a pin spanner wrench also. Don't forget , it's a left hand thread..

[blueskyracer]

Not much to changing out an impeller Mike. Just spin the cone but off and it's right there. The merc tool works great, but I've had good luck using a pin spanner wrench also. Don't forget , it's a left hand thread..

That gives me an idea.. I will go to our local boat shop and see if they can do it for me

[jeff55v]

If it were mine, I wouldn't mess around with it. Send it to someone who really knows what they're doing. I had bad experiences with those units, especially when I installed my own water pump impeller. Things can go seriously wrong.

Is David Steckbauer still doing service work? If he is, I wouldn't hesitate to send it to him.
(I'll dig around for his contact info later today)

[Guest]

Gear Foot

Hi Mike,
If you don't have the cone tool then don't mess with it. Also remember the thread is posit rotation. If you need it done I have Merc impellers and can do it for the cost of parts and shipping.

Alan

[blueskyracer]

Hi Mike,
If you don't have the cone tool then don't mess with it. Also remember the thread is posit rotation. If you need it done I have Merc impellers and can do it for the cost of parts and shipping.

Alan

Thanks Alan.. I guess I should of tried you first.. As soon as I can find a box I will get her on the way

[PRO-MOTIONRACING]

Cone Tool

Hi Mike,
If you don't have the cone tool then don't mess with it. Alan

Anyone have a "cone tool" for sale?

[blueskyracer]

Anyone have a "cone tool" for sale?

Kelly Kidwell has the tool for sale

[mercguy]

Anyone have a "cone tool" for sale?

JDub prolly has a spare one...

[Guest]

Merc tool

I have two new ones I will sell. Just have to make the pins. Cost would be $55.00 plus shipping.

Alan

[Danny Pigott]

Tool

It is easy to make one out of pipe, a socket and two holes drilled in the pipe a plate with the socket welded on one end you can use what you want to go though the holes in to the cone. I have used one for 40 years. Not as good as the merc. one but will work fine

[1100-one]

Wrench

Danny- Your right I made 3 or 4 too very easy to make and they work very well. I gave one to a person on here a year or so ago free. I might have a couple left.

Todd

[Tom Cronk]

Pins

What is the size of the pins??Have a merc puller with no pins.
Tom
tcronk@tampabay.rr.com

[david bryan]

for sale merc cone wrench make me a offer dave 509 844 7751

[ZUL8TR]

cone removal pins

What is the size of the pins??Have a merc puller with no pins.
Tom
tcronk@tampabay.rr.com

Tom

They are 1/4" diameter x 1-7/8" overall including a 5/16" diameter x 1/2" long knurled end grip section (not really needed).

Pete