Yamato Rope Plates

[pav225]

Yamato Rope Plates
We have a new guy interested in running CSH/OSY. We have a Y102 motor, but would like to replace the rope plate. Does anyone have a used Y102 rope plate? We are also looking for a used Y80 rope plate....

Has anyone had any luck in fixing rope plates if the center hex portion is loose inside the aluminum???

-Mike Pavlick
(630) 551-0542

[Brew56]

Mike,

It seems like TJ, if anyone, would have a good answer to that problem. I'm sure he'd have a solution b/c it may be real tough to find some new plates or even old ones. He's on here every once in a while but maybe give him a call. I don't have his # w/ me.

Good luck,
Jer

[Don]

yamato rope plates

I have repaired the plates
soak over nite in lacquer thinner or acetone and flush out untill clear
with air. then force loctite #620 I used a clamp/plate/ fixture, to line
up.I used a vacuum to draw the #620 through .
I also used locquic primer to insure a good bond
Long time ago,hope I covered every thing.
Good Luck
Don 14P / 5Z

[pav225]

Thanks Don!
I'll give it a try.

-Mike