APBA C-Mod Kit

[Aussie Steve]

I recently brought a C-Mod Kit throughout the APBA supplied from Cliff Johnson and am blown away by the quality of every piece included ( side plate , filler block , pipe mount ect ) it can be use fixed or as a slider and all the cable clips and brackets are already installed on pipe and slide stabilizer and guide on the header .

It's a steal at the price .

Disclaimer : I am in not way affiliate with or benefit from sales in any way .

[proprider]

Cliffs Edge Racing

Cliff's stuff was on display at the Wakefield nationals. Have you seen his 750 mod exhaust? It's so nIce I pulled my old Bayer exhaust off and replaced it with Cliffs....TOP SHELF!

[fbref5269]

i agree

i bought the b mod conversion kit from apba in the spring and was impressed with the quality too. i called apba and told them it was top notch. very pleased with it.

frank

[DeanFHobart]

Cliff's Contact Information

Need Cliff's contact information....... have a friend that needs C Mod stuff.

Thanks,

Dean.....................

[Mark.Wheeler]

Cliff Johnson: fcliff@yahoo.com

[fbref5269]

order through apba

you can order the mod conversion kits through apba. for a stick tower that will have the mounting holes for the pipe support contact sonny(he posts here all the time) he makes a nice tower that is drilled for the 80, 102 or the 302.

frank

[Sonny]

Towers

Thank you Frank, I am making Mod towers that are compatible with the APBA mod kit. All parts are cnc machined and top plate can be produced with bolt holes for the Y80, Y102,and Y302 so one tower can be used for multiple mod classes and motors. The APBA mod kit bolts right to the tower with no modification needed. Anyone interested in having one made is welcome to contact me here or call me at 585-899-9438. Thanks

[Aussie Steve]

I haven't tryed to mount it on my mod tower( Lee's) , I will have to make a adaptor plate I'd imagine .

[jeff55v]

Photos and prices for this stuff would be helpful.

Thanks.

[mercguy]

Thank you Frank, I am making Mod towers that are compatible with the APBA mod kit. All parts are cnc machined and top plate can be produced with bolt holes for the Y80, Y102,and Y302 so one tower can be used for multiple mod classes and motors. The APBA mod kit bolts right to the tower with no modification needed. Anyone interested in having one made is welcome to contact me here or call me at 585-899-9438. Thanks

Sonny, do you have any pictures of the tower you are making. What type of clamp assy is is setup for (Yamato/Merc)........what is the tower height?

thanks

[Sonny]

Sure, I will post some pics and measurements tomorrow.

[fbref5269]

the tower sonny built for me

here is the mod tower sonny built for me. i sent him a merc clamp bracket sine the yamato's are hard to find. also here are the adaptor plates he made for me.

frank
52-E

[Tim Weber]

I'm a bit confused by the adapter plates. They both have the 6 hole pattern for a Yamato.

Which is for what?

Tim

[Bob Dunlap]

I'm a bit confused by the adapter plates. They both have the 6 hole pattern for a Yamato.

Which is for what?

Tim

One is for an 80 and the other is for a 102

[99R]

Any pics of the Dmod pipes?