D lower shims

[25ss]

Hey guys i just got a D lower that need some work.
I need some shims and a rear cone nut.
I got some shims from someone years ago for a C but cant remember who?
Also as usual someone has cut the skeg.
Would like to know how long the trailing edge and wide at the bottom.
Thanks Dale!

[laddies]

Here's a spec sheet on the skeg and the correction to the crankcase you were asking about on another forum, while all the answers you got there were technically correct, a good machinist can over come the problems.

[jeff55v]

Cone

Here's a link to some cones:

http://www.boatracingfacts.com/forum...0761#post50761

Maybe you have an old short skeg gearcase. Some of the really old ones came from the factory with a short skeg. Mk 40H I think.

Hope this helps.

[Guest]

"D" cone

We have A/B/C/D cones in stock. You can visit or web site at aeroliner-boats.com. I have some shims also if you need them. Need to know which ones. You can Email me at aerolinerboat@aol.com. All are cones are made from 6061T651 aluminum.

Alan

[25ss]

laddies
Thanks for the imfo on the skeg and on the intake specs. I hope to find a mark 58 or early 500 but if not will be doing some grinding.

Jeff55v
Thanks for the imfo its newer 55H but someone always thinks shorter is better.

OldracerBU
Thanks for getting back to me.
I sent you an email and i will take a cone and some shims.

Thanks guys for all the help im shure i will be asking more questions.
Dale!