Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Merc Twister part# 5767008

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Merc Twister part# 5767008

    Looking for a dist. drive belt for a twister.. part # may be 5767008.. It is longer than than the standard 4 or 6 cyl belt.

  • #2
    Are those SO?

    I can maybe suggest a cat. or maybe you could visit another board?
    RichardKCMo
    Originally posted by Fast Jack View Post
    Looking for a dist. drive belt for a twister.. part # may be 5767008.. It is longer than than the standard 4 or 6 cyl belt.
    RichardK.C. Mo.

    Comment


    • #3
      What?

      I dont understand your response. I am looking for a part for a race outboard, It may be possible another HR member has this part.

      Comment


      • #4
        20140

        Originally posted by Fast Jack View Post
        I dont understand your response. I am looking for a part for a race outboard, It may be possible another HR member has this part.
        Hey Shawn,

        I just looked up a Timing Belt for a 1350 and it lists a 20140 which is the same as the 4 Cyl.

        Regards,
        Dave Scott
        Aim Marine Inc.
        613-831-1246 8-5 Mon-Fri
        Ottawa, Canada
        http://stores.ebay.com/Aim-Outboard-Recyclers
        DS(M)H - 20CE

        Comment


        • #5
          Merc 1000, 1250, 1350, 1150, 1400, 1500

          Hey Shawn,

          All those motors as well as 1250BP etc.. use a 20140 Belt.

          Regards,
          Dave Scott
          Aim Marine Inc.
          613-831-1246 8-5 Mon-Fri
          Ottawa, Canada
          http://stores.ebay.com/Aim-Outboard-Recyclers
          DS(M)H - 20CE

          Comment


          • #6
            Belt

            Hi Dave , The Twister belt is longer for some unknown reason. I think is 68 teeth. It is an Odd ball of all the 6 cyl stuff. Same pitch. perhaps they used a larger o.d. gear set??

            Comment


            • #7
              Belt info

              Dave, thanks for the help, I found out the belt is longer , the dist had to be moved out to clear all the carbs. Hopefully he has 2 belts, I will find out tonight. Shawn

              Comment


              • #8
                Originally posted by Fast Jack View Post
                Dave, thanks for the help, I found out the belt is longer , the dist had to be moved out to clear all the carbs. Hopefully he has 2 belts, I will find out tonight. Shawn

                That would be a T-2 or T-2X, then ... the "Twister" has a normal front and normal carbs

                Comment


                • #9
                  That's what threw me.

                  Originally posted by sam View Post
                  That would be a T-2 or T-2X, then ... the "Twister" has a normal front and normal carbs

                  Hey Sam,

                  Yes you are right! That is why I looked up the number for a 1350. It's a T2-X belt he is looking for. Question is Shawn Do you have a t2x - Pics please.

                  Regards,
                  Dave Scott
                  Aim Marine Inc.
                  613-831-1246 8-5 Mon-Fri
                  Ottawa, Canada
                  http://stores.ebay.com/Aim-Outboard-Recyclers
                  DS(M)H - 20CE

                  Comment


                  • #10
                    T 2

                    The motor is a customers, It was purchased as a "running engine" on a small Delta V type hull. It was anything but running. atfter a new piston, a custom crank repair by MSR and a bunch of work on the ignition it was Running.. I did a lot on the fuel system to get it to run properly. Then the timing belt broke!! I have to make another call tonight .. Hoping for a belt . Shawn

                    Comment


                    • #11
                      Can you post some pics? Thanks.

                      Comment

                      Working...
                      X