Pro Props For Sale

[pro350hydro]

I am listing these props for a friend of mine. He has retired from Pro Racing and has moved on to the National Mod Class in the Inboard division.

He ran all these props on a 700cc Konig

1. Doc Collins 3 Blade 7 1/4 Dia $200.00 SOLD!!!!!
2. Doc Collins 3 Blade 7" Dia $200.00 SOLD!!!!! Payment Pending
3. Hopkins 3 Blade 6 7/8 x 13 $300.00 SOLD!!!!! Payment Pending
4. Hopkins 4 Blade 6 7/8 x 12 $350.00 New Never Ran SOLD!!!!!
5. Hopkins 4 Blade 6 7/8 x 13 $300.00 New Never Ran SOLD!!!!!
6. Dewald 5 Blade 6 3/8 x 12 $400.00 only one heat on it

Buyer pays shipping $10 per prop

[David_L6]

Mike,

If you can it would probably help sell them quicker if you posted the pitch for props #1 and #2, and the rake, prop shaft size and shear pin size for all of them. Even though the props were originally built for PRO they can most likely be used in some Stock and/or Mod classes also. Also, were the Hopkins props built by Floyd before he died or were they built by Glen (that may matter to some)?


Just trying to help - and keep this post near the top.

[pro350hydro]

Dave Good Points

The pitch of props one and two are unknown. If I had to guess I would say they are 12 1/2 - 13. But like I said, it's a guess. Not sure on the rake. But I can get more measurments if people are interested.

All props are for 15mm Shafts, and 3/16 - 5mm shear pin hole

All of the Hopkins props were built by Floyd before he died.

Mike

[David_L6]

Dave Good Points

The pitch of props one and two are unknown. If I had to guess I would say they are 12 1/2 - 13. But like I said, it's a guess. Not sure on the rake. But I can get more measurments if people are interested.

High rake or low rake should be close enough.

All props are for 15mm Shafts, and 3/16 - 5mm shear pin hole

All of the Hopkins props were built by Floyd before he died.

Mike

That's probably the perfect size to start with... Easy enough to have 15mm bored out to 11/16" if you want to run a D Merc unit. It's already the correct size if you want to run a Konig/Konny/Yamato unit and all you need to do is bore it to 11/16" and use a 11/16" to 9/16" bushing if you want to run it on an A/B/C Merc or Hot Rod lower unit.

I think that these props will work in D/E mod.

[pro350hydro]

David,

If you are going to hold me to low or high rake, I'm going to say low.

And yes, many racers have had props bored for larger shafts, and yes again they should make great mod props.

Thanks for your input David.

Mike

[oupoorsoul]

props 2 and 4

would you consider $150 for prop 2

and $275 for prop 4

interested thanks!!! Todd

[JBM]

Will you take 325. for #4 ?

[pro350hydro]

Will you take 325. for #4 ?

Check your email

[pro350hydro]

3 More Left!!!

[David_L6]

3 More Left!!!

Hard to believe that there are any left!

[pro350hydro]

Hard to believe that there are any left!

Your telling me. You would not believe the people interested. Some people have said they need to go shovel some snow to make the money. Some say, their woman just bought some new shoes and they are broke.

No junk here, get em before they are gone. Or you might just get beat next season by one of these props. Now that would suck. Don't be THAT guy. Buy now before its too late.....

Mike

[pro350hydro]

Only one left. This Five Blade would make a nice V-Day gift for your sweetheart!

Buy it today, and I'll pay shipping within the USA!

Mike

p.s. Dan, Get ready to cue your happy ending song

[QUINAULTRACING]

Prop #6, 5-blade

MIKE WILL YOU TAKE $350 FOR PROP #6, AND I WILL PAY THE SHIPPING..Steve..QUINAULTRACING

[pro350hydro]

MIKE WILL YOU TAKE $350 FOR PROP #6, AND I WILL PAY THE SHIPPING..Steve..QUINAULTRACING

Steve,

I will pass this offer on to the owner to decide. I will let you know within a day.

Thanks

Mike

[pro350hydro]

MIKE WILL YOU TAKE $350 FOR PROP #6, AND I WILL PAY THE SHIPPING..Steve..QUINAULTRACING

Check your email