Runne ASH Motor and Roper Hydro For Sale

[crankbearing]

I am listing this for a friend.

- One Roper "A" hydro former Record Holder (Gary Pond can Elaborate on this)
- One OMC "A" motor - bought from Gary built by Ed Runne -Very little time on this motor, was broke in and ran at his cottage a few times over two summers.
- One 2-blade "J" prop
- One France "A" prop
- One never Tested Dewald "AXS" prop
- One "A" test prop
- I believe that both restrictors are there as well.

Also Trailer with no motor box can be modified to your spec will carry two boats with removeable upper racks.

SRP Cut Suit - Dan's old new one. Hardly used from when purchased from Dan.

I am trying to get some pics. The boat had the center deck replaced and the whole boat repainted light blue with flames it is ready to go with all hardware.

Would like to sell and get rid of this stuff before winter flies.

Contact multiroom@sympatico.ca for more details. offers over US3500$ will be considered.

[crankbearing]

pic

here is a pic of the hydro

Regards,

[crankbearing]

MJR history of the boat

Hey Marc,

Do you have any history on this hydro. Gary I think told me the boat came from Florida. Very light and very fast and holds a couple records.

Regards,

[Composite Specialties]

History

If it is the boat I am thinking about, I built it for Kevin Harrell so he could set a record in Florida. The boat was very light weight.

[crankbearing]

What no takers.

This is a fast rig jump on it. So to make it clear for 4000US you get the Trailer, boat, Motor, props, restrictor plates, new impeller, SRP cut suit and life jacket (dan's safety gear) and the test wheel. This is a smoking deal as my chum has almost 6K in this stuff. We want to move it before winter.

Regards,

[crankbearing]

If Memory Serves

If it is the boat I am thinking about, I built it for Kevin Harrell so he could set a record in Florida. The boat was very light weight.

Yes Marc,

I think that is the name Gary mentioned to me a couple times. So this is Kevin Harrell's boat. Light and ready to run fast.

Regards,

[crankbearing]

new deal

Roper "a" hydro 15HP Runne "A" motor France ASH wheel - 3200.00
SRP cut suit and Jacket - Dan's old suit - 500.00

DCH - motor tank, steering bar and t-jack NEW by Charlie Miller 500.00
Dewald AXS wheel never ran - 250$
Dewald DCH prop - High rake round tips - new - 300$
D classic motor 500, new gears and prop shaft, professional paint green/white, electric start with harness - 3500.00 - e-mail me for pics.

Regards,

[crankbearing]

some stuff sold

Roper "a" hydro 15HP Runne "A" motor France ASH wheel - 3200.00
SRP cut suit and Jacket - Dan's old suit - 500.00 (temp sold)

DCH - motor tank, steering bar and t-jack NEW by Charlie Miller 500.00
Dewald AXS wheel never ran - 250$
Dewald DCH prop - High rake round tips - new - 300$
D classic motor 500, new gears and prop shaft- not ran since installed, professional paint green/white, electric start with harness - 3500.00 - e-mail me for pics.

Regards,

still some stuff for sale.

Regards,

[crankbearing]

Some of this stuff is still for sale!

Roper "a" hydro outfit france wheel 3200$
Cut suit / lifejacket 36 pants - Dan's SRP stuff - 500$
DCH - motor tank, steering bar and t-jack NEW by Charlie Miller 500.00
Dewald AXS wheel never ran - 250$
Dewald DCH prop - High rake round tips - new - 300$
D classic motor 500, new gears and prop shaft- not ran since installed, professional paint green/white, electric start with harness - 3500.00 - e-mail me for pics. - SOLD

Regards,

[crankbearing]

Get It Before Winter

Stiff Is Still For Sale - Can Still Get To It Before The Snow Flies - Act Fast - It Will Be Put Away For The Winter Soon

[Lights]

A motor

Dave would you sell just the A motor and a A wheel? If so how much?

Mark

[crankbearing]

package only

Hey Mark,

My chum would like to move the whole rig before winter. We are getting tight on being able to get it before the snow hits. I would probably say a couple weeks max.

Regards,

[crankbearing]

Still up for grabs.

[crankbearing]

to the top

[Hydroglobe17J]

Hey Dave- How much for just the Boat & Motor?