Looking for a few things

[mr2boats]

Looking for a few things a mark 30 driveshaft that can be cut off for c mod,a bayer type cavitation plate,2 pro type driveshaft couplers,and also looking for a couple props 1 tooth reduction for d mod and c mod let me know what you have text me to 3022583848 or facebook message me Timothy Lee

[mr2boats]

Found couplers and driveshafts now looking for props like 6 3/8 -6 1/2 x 10,10.5, and also like 7x11,11.5

[mr2boats]

Let me revise the props 7x11 and 7x12,13,14

[mr2boats]

Also looking for mark 30 merc can be a mod powerhead if reasonable enough so I can put together a c mod.

[bh/]

-may have a cav plate
one a ZAK, other came off a BAYER mid
with water pump
-do u want 4B props ?
-where are u ?

[mr2boats]

what 4 blades do you have

[bh/]

-see cav plate pix below . 2 x 4Bs;
1) Hill Cmod ? 7x11 round blade .
2) Pinner 7-1/2 x 12, tulip blade, DMH/FEH. Neither have been worked.

[mr2boats]

Brian can you call me 3022583848

[pav225]

2 or 3 blade props?

[mr2boats]

3 blade props

[Larry M]

Also looking for mark 30 merc can be a mod powerhead if reasonable enough so I can put together a c mod.

I have a complete Mark 30 motor and a lot of parts to make a C Mod such as Bayer tower , Quincy pipes, Merc 16/21 units. Larry McAfee 660 775 2475

[bh/]

-the black came came off a BAYER under a Cmod; not sure about the white one with water pump ? The ZAK has never been used. Some universal Yamato to ??? adapter plates also.

[bh/]

$150 for the three, post paid.

[mr2boats]

Brian after looking at the mid sections I have the only one I can use is the Bayer and it is already drilled for early yamato pattern/

[bh/]

I am in FL now for the winter. You will have to wait until spring . bh/