Hot-Rod primary (Round) coil pack Motoplat needed.

[STEVE FRENCH]

Spark went away on one cyl at Lock Haven....Checked grounds and tried a new secondary coil/plug wire.... Any known good primary coils out there available ?...... Would like 2......... Complete ignition if you do not want to split ignition up.

Also for another motor need a rotor for a Motoplat ..... Somehow misplaced it....... DOH !

[ricmontoya]

I've got some primary coils and flywheels off of the Yamato Pro motors, Do you know how to identify which one ya need?

[STEVE FRENCH]

I'm not finding any numbers on it

[ricmontoya]

The ones I have look like that. How is it wired to the coils? I might be able to test the ones I have.

[STEVE FRENCH]

will get more pics with the secondary coils and wires..... Thanks Rick

[champhotrod]

What flywheel or lack there of are you running? I may have a rotor.

Cooper Jess
good1@goodprinting.net

[STEVE FRENCH]

Cooper, Found the rotor.... Thanks,,,,, Still need primary coil

[STEVE FRENCH]

Top cylinder wires to secondary coil blue with white stripe black with white stripe wires to bottom cylinder coil secondary solid black solid blue

[ricmontoya]

Thanks for the info, I'll set them up in the lathe and run a lab scope on them. I'll let you know what I find.

[STEVE FRENCH]

Any word Ric ?

[STEVE FRENCH]

Not a clue what that means but.....ok.......

[STEVE FRENCH]

Any word Ric ?

[ricmontoya]

Sorry to have been out of touch, was at the Washington State Governor's Safety Conference for the week.
I ran this thing on the lathe at 350 rpm's, I'm getting a clean crisp signal voltage of 6 volts on all of the primary and pickup coils.

[STEVE FRENCH]

No worries I'm packing up to migrate back to the Winter Nest in North Carolina..... Have pulled the powerhead and the other Hot-Rod prodject is in a tub to put together between the "Honey-Doo" list(s) ...... Phone # ?..... Or message ?..... Or FB message ? >> https://www.facebook.com/steve.french.7

[Tim Sidor]

Steve , I have primary coils and secondary coils if you need them. let me know and I can ship them to you.

[STEVE FRENCH]

Tim, Want to get these motors back running.

Phone ? ......Or call me ...386 -225-8990

[STEVE FRENCH]

Bump ?