Mikuni jets

[racerv24]

Looking for set of Pro jets for Mikuni carb

[1100-one]

Dan,
Are what sizes are you looking for. And are you looking for just the main jets or do you need power jets?

[racerv24]

Looking for main jets

[racerv24]

Broke 3.8 mm at DePue

[racerv24]

Broke 3.8 mm at Depue

[1100-one]

Dan,
I will send you a pm

[1100-one]

Dan,
Not able to send a PM to you but if you need a 3.8 I am not sure I have one that large. I remember buying jets and all the drill bits to make my own. I think

[1100-one]

Dang hit the wrong key lol. I remember the jets coming in 3.0, 3.5 etc and you had to drill out your own to the sizes you needed like the 3.8. Let me look in the morning as I work nights and I will get back to you.
Todd

[Dan M]

Dan, What Mikuni carb does it need to fit? The TM-38 has standard jet threads of 5.5X.9mm and the max you can go with the jet is 3.5mm and still have some meat left for the threads.. Sounds like you have a larger size thread to get up to 3.8mm. If you have a spare jet that is smaller, I can easily open it up for you. PM me.

Dan M.

[racerv24]

Carb is TM 38 has standard hex jet