Where to buy Polycarbonate in the NE?

[mark5pa]

Need a 3' X 4' X 1/16" piece of polycarbonate. Too big to UPS. I live in NE PA. Any ideas?

[KURPS]

Go to McMaster-Carr on the net. They have everything!!

[mark5pa]

Can't ship that size UPS, only common carrier. Robinsville, NJ though, getting closer.

[Fast Jack]

UPS able

usually they will roll it into a 2 foot box 3 feet long = good to go !!

[mark5pa]

usually they will roll it into a 2 foot box 3 feet long = good to go !!

Yep. I had the 1/8" on my mind. The thinner stuff rolls. Duh.
Thanks all.

[john527]

mcmaster carr

try McMaster carr, they will get it to you

[KURPS]

try McMaster carr, they will get it to you

Boy is that a good answer, I should have thought of that. (my typical answer for one of my bosses)

[BROCCOLI]

there are several plastic sheet suppliers in scranton and pittston.

[kev29p]

Harbor Sales

http://harborsales.net/Home/ProductS...=Polycarbonate

[B10L]

Piedmont Plastics

Piedmont Plastics if one is close to you. You can get a full sheet for the price of a 1/4 sheet from McMaster.
http://www.piedmontplastics.com/locations.aspx

[johnsonm50]

Piedmont Plastics if one is close to you. You can get a full sheet for the price of a 1/4 sheet from McMaster.
http://www.piedmontplastics.com/locations.aspx

I didn't see this till now Mark, I'm close enough to Mc-M to pick stuff up but the obvious better deal was nearer than you thought. If you need it otherwise I can pick it up.

[FJOHNSON]

Lowes

I bought a piece at lowes. Bend it cold works great

[mark5pa]

I will take you up on that Mike. I tried them all, no one will roll up a piece to ship, and 4 X 4 is too big to UPS. The girl at McMaster Carr was very helpful, but no. Said it was too stiff to roll. I tried all the glass places up here, and Mesco in Scranton was the only one that could even get 1/16", and they wanted $95 for the half sheet!! Lowes & Home Depot only have 1/8", which I have now. Kinda overkill for a wind screen, and heavy.

[runabout333]

McMaster-Carr

#8574K71-- 48 x 96----$75.26
#8574K81-- 48 x 48----$41.87

[mark5pa]

Yep. Sad they can't ship. I am in no rush so Mike can pick it up, and bring it to the R3 Banquet March 8th. Wont take but a minute to carve out.