Wanted: D Quicksilver/MK 40H lower swivel bushing

[dndsam]

Any leads on a lower swivel bushing for a D tower/MK 40h tower would be appreciated. Oldmercs.com no longer has them available.

Doug S.

[ZUL8TR]

Merc parts

Try David at

http://www.aeroliner-boats.com/index.html

If you are unable to get them can always oversize the bushing bore and sleeve it

[trident]

40H / 55H Swivel Bushing

Easy to make from two standard bronze bushings, both readily available... one has flange, fits OD, other is straight, presses into the flanged one to give correct ID. Face off the flange, if needed, as the flange is a tad thicker than original brass/rubber or solid bronze version. Don't take too much, as you don't want any vertical play.

Press into tower, good to go. Loctite is good.

These work top or bottom, so shim the pin up at the bottom if it sits too low.

Hope this helps.

Jerry