Konig Parts

[Phoenix]

Can anyone give me information on where to find Konig Engine Parts? I can't seem to find anything on the internet! I have 2 new "C" engine flat top pistons, 2 sets of lower unit gears, 1 used, 1 new, 2 gear cases, points and plugs. I am looking to sell these parts but I don't know what a fair asking price would be. Contact Phil, 810-329-7026 or Phil130M@sbcglobal.net

[DiGia54D]

Phil,
Go under buy and sell forums Troy Davis is selling a bunch of konig parts. 500 700 1100 konigs... or you can contact Steve Litzell on here.

[bh/]

Really, no better place than here. I know of no Konig web site.
To make you an offer I need to date what u have;
ie; early, 60s. or later, 80s
Are the gears straight cut, not spiral,
and separate from their shafts.
And are the cases early 'tail loaders', LINKS,
or the later split case?
30" pistons could be 2 cylinder FC, or later 4 cyl VC.
Some pix would answer these Qs?, or some dims.
PS; -where are u ?

[sam]

If you don't know the answers to Brian's questions ... pictures would be very good

[Phoenix]

"Konig Parts"

Hi Brian, I am located in St. Clair, Michigan. I bought the parts/equipment from a retired Pro racer and believe they are for/from a early 60's model engine since his engine serial # was FC6397. The gears are 14 tooth straight cut with HR5303 stamped on them. The gear cases are "tail loader", and not split case, and the pistons are flat top and have tags on them as FC Stock and are stamped FSC 72 on their top , bore size is 2.828 Thanks for your interest Phil

[T Chance]

Off-and-on people sell Konig parts on e-Bay. Put a reserve price on them so you don't end up giving them away and see what happens.

[bh/]

....bore size is 2.828..." Phil

-they are from the FC, FCS[stock] motor of the early 60s,
the 'big-jug' C .[72mm bore]
I have gears here[cracked] marked 5303 for the LINKS l/u,
so what u have is all from the same era.
I will PM u with an offer, but going on ebay would be a good idea.
Let us know if u do.