C Mod Conversion Parts

[DeanFHobart]

Again..... Who is making the C Mod conversion parts..... pipe, filler block, manifold, gear case nose cone, etc. Is the pipe the same for a 102 and 302?

Thanks.....

[JBM]

Cliff Johnson and Dudly Malone are both supplying c-mod conversion kits.

[blueskyracer]

Dean I believe it is Cliff Johnson

[Aussie Steve]

Cliffs can be brought throught ths APBA .

And I believe the 302 and 102 pipes are different , they are tuned to the ports .

[propfxrO84]

Dudley's are very nice. His contact # is 405-503-6010.

[bob Johnson]

About how much money for a turn key kit?

[blueskyracer]

About how much money for a turn key kit?

I had heard for everything it is about $700

[fbref5269]

i bought the bmod comversion kit

i bought the bmod conversion kit. need to make one change, but very happy with it.

frank

[mercguy]

Again..... Who is making the C Mod conversion parts..... pipe, filler block, manifold, gear case nose cone, etc. Is the pipe the same for a 102 and 302?

Thanks.....

yo Deano, I have a used Tietze 302 pipe setup (pipe, filler block and elbow) if you are interested..........

[fcliff]

Conversion Kit Parts

Here is a picture of the mod conversion kit parts that are sold thru APBA. There are now a good number of these on the water with very good success. Feel free to contact me if you have questions.
Cliff Johnson
fcliff@yahoo.com

[mercguy]

Here is a picture of the mod conversion kit parts that are sold thru APBA. There are now a good number of these on the water with very good success. Feel free to contact me if you have questions.
Cliff Johnson
fcliff@yahoo.com

Cliff, is there a link on the APBA site to purchase your kit?

[bh/]

Cliff, is there a link on the APBA site to purchase your kit?

-as of last week I could not find any reference to CLiff on here,
or the APBA 'resource' centre

I still have a 102 mod l/u FS.
9/16", profiled & fresh seals by Cronk, pointy nose etc.
$450

[Boatracer4fun]

I think TJ also has them too.

[Aussie Steve]

Some good info in the C-mod social group here on HR .


http://www.hydroracer.net/forums/group.php?groupid=4

[fcliff]

Cliff, is there a link on the APBA site to purchase your kit?

I understand that this is in process but is not an option at the moment. I think it is important to get this done. Until then interested persons can call Linda Likert at the APBA office. I can answer any application questions. An easy contact is my email at fcliff@yahoo.com