44ci Merc fishing engine carb part needed

[25xs]

Does anyone have any newer Mercury 44ci fishing engine carbs like WMA-9, -10, or -13 like the ones that are on a 44XS style block/engines?

On the fishing engine, the top carb has a fuel inlet fitting instead of just a bolt holding the bowl to the carb body. A friend broke that fitting and it's NLA from Mercury. It's not used on the top 44XS carb, just the fishing engines.

Thanks,

Tom

TBrockSki@aol.com is my direct email.

[ricochet112]

Try Sea-Way Marine 206-937-7373

[crankbearing]

I might have one Tom. I'll take a look.

Dave

[trident]

44 Carbs

Do you mean the brass fitting that retains the bowl and taps fuel OUT of the bottom of the bowl, to supply the primer system?

Should be easy enough to find, any good Marina, off a junk motor...

I have several sets of the later primer equipped (no choke) WMA carbs available for sale.

$100 per pair, complete, right off a fishing motor, top and bottom, + shipping.

We've had success using some of these in D Mod. Block off the primer. No choke shaft and butterfly...

Jerry

[trident]

Carb Part

Found your part, if its what I described above...

Offer? The shipping will cost more than the part.

Jerry

[25xs]

Jerry, yes the bowl retainer bolt/jet with hose barb nipple.

Do you mean the brass fitting that retains the bowl and taps fuel OUT of the bottom of the bowl, to supply the primer system?

Yes, that part, the bowl retainer bolt/jet with hose barb nipple. Only used in the top carb on later (oil injected?) 44ci Merc fishing engines.

How 'bout $20 for it?

Tom
TomBrockmeyer at gmail.com is my direct email. Thanks

[trident]

Carb Part

That's way too much for it. Its brass, not gold...

Its a part I take off when I convert them to Mod carbs, which is why I have a of couple loose ones. (otherwise its an issue of 'stealing' one off a perfectly good carb, making the carb unsellable, as parts are missing) Here, we both benefit!

Drop me a note with your shipping address to my shop e-mail tridentracing@new.rr.com and I'll make you a much better deal.

You can pay me via PayPal to that e-mail address once we agree, fair enough?

Thanks.

Jerry