Getting too big for the class, and due to other financial reasons, need to sell off my A Hydro equipment.
1 - A Hydro, Keylard, Early-Mid 90's vintage, formerly owned by Joe Pater, raced by Kelly Pater-Hearn and Kevin Ladd. Very narrow cockpit, can have exact dimensions tomorrow afternoon. Could be used in J/AX Hydro also.
Price: $900. Second picture is this boat.
1 - A Hydro, Keylard, Early-Mid 90's vintage, formerly owned by Mike Ross and Mike Affholter. 34 inch bottom. I repainted and did a fair amount of work on the boat, still some speed in the boat which can certainly still be tapped into.
SOLD This boat has the checkerboard paint scheme, fresh paintjob with lots of time invested into it, first picture
Other equipment:
(4) GLM Pistons w/rings (sold)
(1) OMC Gearfoot sold
(1) OMC Carb (Tim Sidor) (sold
(1) Exhaust Pipe w/water tubes & grommets (sold)
(1) Tower housing w/cowling (sold)
(3) armature plate w/electronics (magneto plate)
(4) Power Packs (2(sold)
(3) coils (1 complete set) (sold)
(1) wooden A gas tank
(1) rewind (sold)
(1) crank from OMC 15 fishing motor (center main bearing is different from racing crank)
(1) steering bracket (mounts on motor)
(1) carb casing (no internals, i.e. float, needle, etc.) (sold)
(1) exhaust cover (outer and inner w/new gaskets)
(2) bypass covers
(2) rods
(1) crank from Racing motor
(1) exhaust cover - inner and outer w/o gaskets
(2) manifold intakes
(1) leaf plate and assembly
(1) cylinder head (sold)
(5) leafplate gaskets
(1) bypass cover gasket
(6) sets GLM rings (sold)
Please email or call for more details, will post more details/pictures as I have available. Equipment is in Ann Arbor, MI area.
-Elek Hutchinson
elek.hutchinson@gmail.com
(248) 303 2643
1 - A Hydro, Keylard, Early-Mid 90's vintage, formerly owned by Joe Pater, raced by Kelly Pater-Hearn and Kevin Ladd. Very narrow cockpit, can have exact dimensions tomorrow afternoon. Could be used in J/AX Hydro also.
Price: $900. Second picture is this boat.
1 - A Hydro, Keylard, Early-Mid 90's vintage, formerly owned by Mike Ross and Mike Affholter. 34 inch bottom. I repainted and did a fair amount of work on the boat, still some speed in the boat which can certainly still be tapped into.
SOLD This boat has the checkerboard paint scheme, fresh paintjob with lots of time invested into it, first picture
Other equipment:
(4) GLM Pistons w/rings (sold)
(1) OMC Gearfoot sold
(1) OMC Carb (Tim Sidor) (sold
(1) Exhaust Pipe w/water tubes & grommets (sold)
(1) Tower housing w/cowling (sold)
(3) armature plate w/electronics (magneto plate)
(4) Power Packs (2(sold)
(3) coils (1 complete set) (sold)
(1) wooden A gas tank
(1) rewind (sold)
(1) crank from OMC 15 fishing motor (center main bearing is different from racing crank)
(1) steering bracket (mounts on motor)
(1) carb casing (no internals, i.e. float, needle, etc.) (sold)
(1) exhaust cover (outer and inner w/new gaskets)
(2) bypass covers
(2) rods
(1) crank from Racing motor
(1) exhaust cover - inner and outer w/o gaskets
(2) manifold intakes
(1) leaf plate and assembly
(1) cylinder head (sold)
(5) leafplate gaskets
(1) bypass cover gasket
(6) sets GLM rings (sold)
Please email or call for more details, will post more details/pictures as I have available. Equipment is in Ann Arbor, MI area.
-Elek Hutchinson
elek.hutchinson@gmail.com
(248) 303 2643
Comment