FS: FE Props, parts etc

[bh/]

1) 3>1 exhaust manifold, Mod 50 copy, $225
2) 3 OMC 497 drive shafts,
-OMC 3/4" x 5/8" x 12mm, 7-1/4" long, $30
-OMC 3/4" X 1/2" X 12mm, 7" long, $30
-OMC 3/4" x 3/4" x 3/4" round, 7-5/16" long, $15
3)Props;
-Pinner, 15mm, 7-5/8 x 12+ $250
-Pinner, 15mm, 7-3/8 x 12+, $250
-Hill, 11/16", 8 x ??, $160
4)Pistons/rings/pins, 3, McDaniels Mod50, 3.020", $225

Props were for use with one under gears.
I should be at Tabor City in OCT.
bhendrick@earthlink.net

All this stuff is back up north,
I am in FL for the winter,
Can not get to it til then

[marksmercs82r]

Hi Please send info on 3>1 manifold? thanx 82-R

[bh/]

Bolts onto a 497 powerhead, w/o modification.
Exhaust plate is by RPMS, ie; McDaniels.
We took an aluminum billet, and carved the inner profile
of a Mod50 exhaust into it, but flowed it up,
out a detachable megaphone.
Similar to what Tim Kurcz is now making.
I am in FL for the winter
so will not have access to it until the spring.

[daveracerdsh]

Props

I might be interested in the Hill wheel.....do you know what the pitch is?

[bh/]

I might be interested in the Hill wheel.....do you know what the pitch is?

No. Everything I measure is way under what others measure,
especailly over 10". Look at my posts under the 'Pitch meter thread'.
and u will see why.
Maybe Ron knows what it is ?
They are all up north, so can not get at them til spring.