Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Linkages Wanted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Linkages Wanted

    I need all linkages for 2 OMC A carburetors. If anyone out there in kneeldown land has any, I will take them.

  • #2
    Korbus

    Contact John Korbus at jmkventuresinc@sbcglobal.net

    John has the aluminum linkage for the top of the carb and is working on a replacement for the black plastic one.
    Support your local club and local races.

    Bill Pavlick

    I'm just glad I'm not Michael Mackey - BPIII

    Comment


    • #3
      Still Looking

      Originally posted by BP125V View Post
      Contact John Korbus at jmkventuresinc@sbcglobal.net

      John has the aluminum linkage for the top of the carb and is working on a replacement for the black plastic one.
      No response.

      Comment


      • #4
        Still Looking

        Still looking. I really need these.

        Comment


        • #5
          If you need the black plastic piece, I have a few of them.

          Joe

          Comment


          • #6
            still need

            [QUOTE=Joe J;184570]If you need the black plastic piece, I have a few of them.

            Joe[/QUOTE

            sent PM. Still looking.

            Comment


            • #7
              The black plastic one is the same bellcrank that a 4hp/6hp OMC motor from 1965 through the last year of the points ran. All you need to do is drill a hole for the stainless rod on top and you are rocking.
              I posted a picture here eons ago showing the similarities
              Bill Schwab
              Miss KTDoodle #62C
              -Naturescape encinitas landscape company

              Comment


              • #8
                Linkages

                Originally posted by Skoontz View Post
                The black plastic one is the same bellcrank that a 4hp/6hp OMC motor from 1965 through the last year of the points ran. All you need to do is drill a hole for the stainless rod on top and you are rocking.
                I posted a picture here eons ago showing the similarities
                Would be nice if I had that laying around. I've searched my entire yard trying to piece this motor together. I picked up two carbs in Michigan but did not have any linkages. Trying to get this motor together so that my son can at least get some seat time before the season ends. I've had several "I have what you need" responses but, when I inquire about them, no response. Need two sets but will settle for one.

                Comment


                • #9
                  Originally posted by Skoontz View Post
                  The black plastic one is the same bellcrank that a 4hp/6hp OMC motor from 1965 through the last year of the points ran. All you need to do is drill a hole for the stainless rod on top and you are rocking.
                  I posted a picture here eons ago showing the similarities
                  The part # is 312832 and unfortunatly they are NLA.

                  Contact Joe Johnson, he has some.

                  John Myers was making the aluminum bellcrank I think 425-485-6139.

                  Comment

                  Working...
                  X