If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I appreciate all who replied with the whole unit but I already have the "toilet bowl" and just need the elbow and filler block. With racing, membership dues, rebuilding a Y80 crank and building a boat trailer I just do not see the need for another lower unit at this time.
Mike, I'm in the same boat....no pun intended. I have a beautiful tb leg and filler block but the exhaust elbow unfortunately was discarded or lost during a shop cleanout and relocation. (I didn't do it!!) If you find out anything please let me know. I have a ss b merc 20h (my first race motor, std. bore) that will someday sit on the toilet bowl leg. I have a 1974 SEAJAY conventional hydro (10'6") w/3 20h motors and a b-1 omc, 25 b-1 merc, 12'2" Byers knock-off pickle fork hydro...very light. I raced in AOF over thirty years ago. Attended and competed in the 1978 AOF Super Stock Nationals in the Fort Worth/Dallas area. Back then AOF's days were numbered....in the midwest anyway.
I have one extra elbow and filler block with new copper seals for $285.00 and one extra filler block with copper seals for $95.00. Shipping for the elbow and filler block will be $10.00 and filler will be $5.00
WOW! That's faster than a McDonalds drive through!! I'll take it. If you'd like you could call me anytime and we'll work out the details....up to you. 816-261-1846 BOB. Thanks.
Comment