Tweet
Okoume 5'x10' plywood close out: 4mm - $108, 5mm $125, 6mm $142.
Yamato 80 18mm head, standard bore, $800.
Yamato 102 Gear Case New pinion shaft and gears, blue printed, 9/16” prop shaft $595
DSH (NEW) The bottom & sponsons are a Karelsen copy, the top is a Sorensen copy with an Apel cowl, built by Ken Hehr, 11’4” long, 36” bottom 80” afterplane, weighs 125 lbs, no hardware, $1995.
10" Powermatic Artisans table saw, 110/220v, 1 1/2 hp, Casters, Vega fence, $295
PROPS 2 BLADE
Michigan Stainless: 6x10 for a KG4H or Mark 15H, $50. 7x13 with 15mm prop shaft bore $50, 7x11 for 55H Runabout $50, 60J props $50.
Cary Stainless; 60J $50, 6x10 ASR $50.
Kamic Steel; 6 ½ x10 30H Runabout $40.
Michigan Brass; 60J $25.
Cary Brass; 6 5/8 x10 30H Hydro $25
Oakland Johnson Brass; 6 3/8 x12 20H Runabout $25, 6 5/8 x 11 $25.
CALL Ric Montoya @ 206-283-4773
EMAIL ricstr4@gmail.com photos available via email
www.yamatoracing.com
Yamato 80 18mm head, standard bore, $800.
Yamato 102 Gear Case New pinion shaft and gears, blue printed, 9/16” prop shaft $595
DSH (NEW) The bottom & sponsons are a Karelsen copy, the top is a Sorensen copy with an Apel cowl, built by Ken Hehr, 11’4” long, 36” bottom 80” afterplane, weighs 125 lbs, no hardware, $1995.
10" Powermatic Artisans table saw, 110/220v, 1 1/2 hp, Casters, Vega fence, $295
PROPS 2 BLADE
Michigan Stainless: 6x10 for a KG4H or Mark 15H, $50. 7x13 with 15mm prop shaft bore $50, 7x11 for 55H Runabout $50, 60J props $50.
Cary Stainless; 60J $50, 6x10 ASR $50.
Kamic Steel; 6 ½ x10 30H Runabout $40.
Michigan Brass; 60J $25.
Cary Brass; 6 5/8 x10 30H Hydro $25
Oakland Johnson Brass; 6 3/8 x12 20H Runabout $25, 6 5/8 x 11 $25.
CALL Ric Montoya @ 206-283-4773
EMAIL ricstr4@gmail.com photos available via email
www.yamatoracing.com
Comment