Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

25ssh rigs for sale!!!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 25ssh rigs for sale!!!!!!

    I have been in contact with several drivers that are interested in selling their rigs. (one needs money quick and one has retired)
    Two of these have been some of the fastest I have ever raced against.
    There are also several engines for sale to racers only.
    If you are close to Regions one thru three, we averaged 6 to 11 boats per race this year.
    If you are seriously interested in stepping up your program please email or private message your phone number and I will give you a call to discuss.
    Thank you, Jeff
    http://www.stockoutboard.com/

  • #2
    Jeff is correct - If you are in the Northeast, 25SSH is a great class to run. In ten South Shore Outboard races this season, we averaged 8.56 25SSH's per race! That was second only to CSH with 9.11 boats per race and should have surpassed the CSH's if the Race Director at three of our events had got his off the Trailer!

    Region One has thirteen days of racing scheduled for 2010 and 25SSH will head the list. Join the fun and buy one of these rigs.

    Comment


    • #3
      As of last night, I may know of another very fast engine for sale. This one needs a good home too. It's still early in the winter, maybe you can work out a deal with the owners??? (ie. a dollar down and a dollar per week)
      http://www.stockoutboard.com/

      Comment


      • #4
        Engines

        Jeff,
        I'm in Toronto, TORC member, we met at Wfd in Oct.
        Definitely interested in more details on engines. I have a KCraft BH w/o power.
        What's best way to contact you for more info?
        Erik
        B:905-858-4917
        Stock Outboard Racing!....because other sports,....golf, football, baseball, etc....only require one Ball!

        Comment


        • #5
          Erik,

          I have a fresh 25XS in my basement collecting dust in Ottawa. does not even have a heat of racing on it after the rebuild. I also have two 25xs A blocks that I am going to send out to rechrome and then I will be building two more engines from those.

          Regards,
          Dave Scott
          Aim Marine Inc.
          613-831-1246 8-5 Mon-Fri
          Ottawa, Canada
          http://stores.ebay.com/Aim-Outboard-Recyclers
          DS(M)H - 20CE

          Comment


          • #6
            Hey Jeff who has the 25 motor for sale?
            MJR Composites racing...cleveland division

            Comment


            • #7
              Here is one of them......

              http://www.hydroracer.net/forums/sho...threadid=17419

              (most 25ssh are only a Csh with a low transom)
              http://www.stockoutboard.com/

              Comment


              • #8
                Originally posted by hydroid View Post
                Jeff,
                I'm in Toronto, TORC member, we met at Wfd in Oct.
                Definitely interested in more details on engines. I have a KCraft BH w/o power.
                What's best way to contact you for more info?
                Erik
                B:905-858-4917

                Erik, Dave will be able to help you the best since he is so close to you and has great equipment and talent to get you going. You can contact me by Pm or email thru this site. Jeff
                http://www.stockoutboard.com/

                Comment


                • #9
                  Originally posted by 371-M
                  Hey Dave, questions on the 25xs- got a heavy duty recoil?
                  got a new style cowl- upper and lower?
                  got a x22 carb?
                  how's the gearcase?
                  -bout 4k canuk fund's EH ??- LOL

                  POST PIC
                  Yes two the first two questions, I am sure the carb is correct I am not sure if that is the number but I know I tested 6 or 7 carbs with new plugs (varying heat ranges) until I found the one that I LIKED. I cannot remember which reed block I installed but I have one of every revision and I have tested them all. This one has my best flywheel out of 5 tested. Best crank of the 10 I had etc. etc.. The gearcase was rebuilt when I got it with new everything except a driveshaft but if I recall it had less than a .0005 runout on the bottom bearing surface and that was the best one I had out of 4 shafts. I do recall the CC's being really tight on this block hence why I chose this one to build and the little things you look for in a 25 block were all there.

                  Ask Earl D how it runs I think he was the last one to Drive it at long Sault (No offense Earl, but that is why I stated above it did not have a single heat of racing on it yet! - LOL Luv Ya Buddy) before I put it on the stand in the basement, he had big eyes and white knuckles after the heat he did not run the 2nd heat. - LOL.

                  Price 10,375,000 Rupeeeeees with a Single Euro on top.

                  Regards,
                  Last edited by crankbearing; 11-12-2009, 08:48 PM.
                  Dave Scott
                  Aim Marine Inc.
                  613-831-1246 8-5 Mon-Fri
                  Ottawa, Canada
                  http://stores.ebay.com/Aim-Outboard-Recyclers
                  DS(M)H - 20CE

                  Comment


                  • #10
                    Engine details

                    Dave, thx for reply, you going to TORC AGM?...could catch up w you there, otherwise will call you.
                    Erik
                    Stock Outboard Racing!....because other sports,....golf, football, baseball, etc....only require one Ball!

                    Comment


                    • #11
                      Ask Earl D how it runs I think he was the last one to Drive it at long Sault (No offense Earl, but that is why I stated above it did not have a single heat of racing on it yet! - LOL Luv Ya Buddy) before I put it on the stand in the basement, he had big eyes and white knuckles after the heat he did not run the 2nd heat. - LOL.
                      That's because it wasn't on a Runne Craft, my friend Dave! lol
                      Earl 11 J........ Dangerous when Wet Runne Craft- Earl said, " Driving a Runne Craft is like Cheating". Dude, ........ Where's My Boat!

                      Comment


                      • #12
                        I have had some nibbles, but no buyers.

                        Who wants to step up their program in 2010???
                        http://www.stockoutboard.com/

                        Comment


                        • #13
                          25SSH rig

                          For Sale: 3-time APBA National Champion ('95-'97) 25SSH rig.
                          Engine has won 3 Nationals and placed in top three a few other times. This a a chrome bore "A" block. Has later style carb linkage.

                          Boat is a late 80's/early 90's B&H.
                          - 71" afterplane
                          - 10' 2" overall
                          - 35" bottom

                          Dewald prop that won multiple 25SSH National Championships comes with the rig.

                          $3500.00 for complete rig. Please contact Mark Miskerik at hydroracer25@sbcglobal.net or Gary Miskerik at miskerik5689@aol.com if you have questions or send me a PM for phone numbers. Rig is located in Michigan.

                          More pictures available upone request.
                          Attached Files

                          Comment

                          Working...
                          X