NEW, 13:14 YAMATO Hatchet Foot Gears

[Brian 13-V]

14:15 YAMATO Hatchet Foot Gears
Horizontal Split, Spiral Cut (replicas)

TOTAL COST: Under $500 per set.
Final price determined by amount produced (25/50).

DEPOSIT: $200 per set.

GUARANTY: Equal or better quality.

DELIVERY: (projected) Late Winter.

ORDERING DRIVERS: Barfield, Besonen, Brill, Caferrelli, Hay, S. Johnson, Kampen, Laws, McAfee, Palmquist, Robb, Terzinski x2, VanOver.

PLEASE E-MAIL: BPquick1@aol.com, specifying how many deposits you will be sending.

PROJECT MANAGER: Frank Erion (772) 398-0522 has successfully reproduced and made available Mercury straight cut 16:21 gears and Mercury straight cut 15:16 gears.

SEND DEPOSIT TO: Frank Erion, 3243 SE River Vista Dr., Port St. Lucie, FL 34952. Please specify desired shipping address.

Thanks for supporting this much needed project.

Regards,
Brian Palmquist (847) 337-2912
Non-Proprietor, helping coordinator

FYI: Separately, Dennis Hansen (920) 233-6934 has successfully reproduced and made available Mercury 1:1 D gears. Yamato stock gears are available through Ric Montoya (206) 283-4773.

[brian]

These gears are in huge demand and do not expect them to be made and waiting for you. Do not be that boat racer who does not support the people who keep our sport moving faster than ever.

Just my thoughts

B

[brian]

Frank also has new 1 under gears for the 55h foot. If you race a 55h you should have these on your shelf or under your motor.

[bh/]

Frank also has new 1 under gears for the 55h foot. .

-and 16:21s, that have meet all expectations.

[SAWYER]

IF I COULD FIND A HORZ SPLIT HATCHET HOUSING I WOULD DEFINITELY BUY A SET OF GEARS!!

[Dave M]

Price

Why are they so much higher than what Yamato gets for them ?

[raceright]

Why are they so much higher than what Yamato gets for them ?

Made un the USA maybe a union shoplolololo

[Brian 13-V]

Pricing concerns...

Frank, the project manager, was unable to acquire price quotes for the replica 14:15 hatchet foot gears until the racing season ended and a set could be provided and sent. The replica gear sets are expected to be somewhat closer to the price of the originals; however without a quote, it is safe to advertise “less than” $500, in order to get the project moving. Although unsuspected, if the price quote turns-out to be over $500, your deposit will be returned to you, if you wish.

Unlike gears reproduced in the past, contributing factors that may affect price include… Engineering costs will be higher, since no drawings or patterns have been provided for the development of the new gears. Also the pinion “stub” shaft is unique from others previously reproduced.

Deposits are still $200 per set. Keep those deposits comin’. Once Frank has the manufacturer’s quote, we will have an exact price. Frank continues to reassure that the quality will be the same or better than the originals.

It’s much less expensive to buy new gears than to buy new lower units. Once you have new lower units, now you have a whole new set of replacement parts, plus more replacement gears.

Don’t wait… place your order now. It will be cost effective for all of us to be able to place an order of 50 opposed to 25.

Regards,
Brian P
BPquick1@aol.com

[Linggi]

Gear sets

14:15 YAMATO Hatchet Foot Gears
Horizontal Split, Spiral Cut (replicas)

TOTAL COST: Under $500 per set.
Final price determined by amount produced (25/50).

DEPOSIT: $200 per set.

GUARANTY: Equal or better quality.

DELIVERY: (projected) Late Winter.

ORDERING DRIVERS: Barfield, Besonen, Brill, Caferrelli, Hay, S. Johnson, Kampen, Laws, McAfee, Palmquist, Robb, Terzinski x2, VanOver.

PLEASE E-MAIL: BPquick1@aol.com, specifying how many deposits you will be sending.

PROJECT MANAGER: Frank Erion (772) 398-0522 has successfully reproduced and made available Mercury straight cut 16:21 gears and Mercury straight cut 15:16 gears.

SEND DEPOSIT TO: Frank Erion, 3243 SE River Vista Dr., Port St. Lucie, FL 34952. Please specify desired shipping address.

Thanks for supporting this much needed project.

Regards,
Brian Palmquist (847) 337-2912
Non-Proprietor, helping coordinator

FYI: Separately, Dennis Hansen (920) 233-6934 has successfully reproduced and made available Mercury 1:1 D gears. Yamato stock gears are available through Ric Montoya (206) 283-4773.

Do you have gear sets ratio 1:1 for fishing yamaha 30hp 3cyl,,i wanted to replace total of them, the present gear ratio pinion gear is 13teeth and prop shaft gear is 26teeth.

so i wanted to replace same teeth 14:14 or 15:14 , the diameter of gear should be like original one