OMC Exhaust systems ready for immediate shipment

[Tim Kurcz]

To all FE/850 drivers looking for Mod-50 pulse tuned exhaust, I've got three systems ready for immediate shipment. All have electroless nickel plated manifolds and cones. These are dimensionally correct external copies of the cast factory versions, improved with one less bend. Top outlets offer the cleanest water vapor free tuning, a feature the factory wished they could have in the 70's, but only allowed in Mod. $595 each includes all fasteners, gasket, silicone sealant and shipment in the 48 states. Don't wait!

Tim

[Hunter]

Tim...can the down version I have be retrofited to any advantage ??
Hunter

[Tim Kurcz]

Down to up conversion?

Hello Hunter,

It's possible, but because of cooling system architecture, the manifolds are not interchangeable. You will have to send me your divider plate. A new manifold can be built, new mounting holes drilled and tapped, and the old ones plugged. The cone is interchangeable. Send it soon if you want one this year.

Tim

[larry terzinski]

44 ?

TIM:

Do you have cooled filler blocks, stack plate, elbows available for 44's ?

Lars 36W

[Tim Kurcz]

Parker exhaust

Hello all,

Yes, I sell casting kits or fully finished exhaust systems for in-line 2,4,6 cylinder Mercs. See image.

Tim

[STEVE FRENCH]

Any pics of the 22 Merc...Mark-28/25SS cover/filler....

19P/100N

[Tim Kurcz]

Exhaust systems

Here's 2009 pricing for Parker-Kurcz Mercury, OMC 2-cyl, and Hot Rod exhaust systems. All include filler block, divider plate, water bypass cover, elbow(s), painted cone(s), springs & fasteners as apply. Nickel plated cones +$50 each. Prices do not include shipping.

2-cyl
Casting/parts kit = $368
Finished/fitted dry = $498
Finished/fitted wet = $568

4-cyl
Kit = $512
Dry = $820
Wet = $895

6-cyl
Kit = $1012
Dry = $1288
Wet = $1432

Price and delivery subject to change based on casting price and workload. If you want a finished Parker system for the 2009 racing season (delivery May 1 or sooner) I need your deposit by Feb 15. 50% deposit with your order, 50% upon completion before shipment. For accurate fitting, your block is needed here at the shop.

Kits include raw castings, dividers plates, etc. You'll need a Bridgeport mill, a drill press, a die grinder, thread taps, and good machine knowledge. They can be ordered any time. Good luck in 2009!

Tim

[Dave M]

Contact Info

Tim,

What is your phone number ?

[Tim Kurcz]

Contact info

Hi Dave,

You can call me at 248-770-6897 (cell). After 4:30 PM weekdays, and ant time on the weekend is best. If it rings into voice mail please leave your name and number. I'll call back.

Thanks!

Tim