SST45 96 Hoffman

[gbarber]

For Sale: 1996 Hoffman. 2009 rebuilt transom to tips.

Ran one race so far this season.
Wood work by Kurt M.
Re-decked with extra stiffening in frames.
New flotation foam.
Bottom of boat was flattened in rear.
Capsule and canopy stiffened and reinforced.
Seat reinforced.
New canopy hold-up springs.
New Gordie canopy hold downs.
New trim indicator.
New wiring with Amphenol harness connectors to power head.
Working Tiny Tach
New 5-point Simpson belts. All belt dimensions and angles of belts are per the OPC rule book.
Foot throttle, u-bolts, through hull fittings, steering, and switches are all rebuilt.
Steering wheel has Start, Trim and Fuel primer switches mounted in wheel spokes.
Additional weight mounts in front of gas tank and in nose.
2 inches of foam above and to the sides of the head area. I’m 5’6, and I still have over 2” of clear space between helmet and foam. 1 inch of foam behind head plus ½” of foam on sides of driver area.
Rock solid rough water boat.
Boat is real water tight.

Paint by Paul W. at ASI Freeland MI

I weigh 160 lbs and with 4lb in the nose and boat weighed in at 722 with 4 gallons of fuel so I added 5 ½ lb in front of fuel tank.

Sold with no trailer, power head, lower unit, radio, or AGM battery.
$7,000 invested. Tons of hours in labor. Make offer.
Can be seen at the next event in Trenton, MI (Region 6)

Gary Barber
989 684-7956
gbarber@chartermi.net

[BURKHARDT]

Hoffman

Gary,

Is that the boat you bought from Ara.

Burkhardt

[gbarber]

Brian,
No it's not Ara's.
This one was Jason Nelson's
The Ara boat didn't make it after the crash in Trenton last year.
Dave Hoggard has the remains and is rebuilding the cell.

Gary

[gbarber]

SST45 96 Hoffman Price Reduced

We are lowering the price to $6,000 OR BEST OFFER

For Sale: 1996 Hoffman. 2009 rebuilt transom to tips.

Ran three races so far this season. See it at Kankakee.
Wood work by Kurt M.
Re-decked with extra stiffening in frames.
New flotation foam.
Bottom of boat was flattened in rear.
Capsule and canopy stiffened and reinforced.
Seat reinforced.
New canopy hold-up springs.
New Gordie canopy hold downs.
New trim indicator.
New wiring with Amphenol harness connectors to power head.
Working Tiny Tach
New 5-point Simpson belts. All belt dimensions and angles of belts are per the OPC rule book.
Foot throttle, u-bolts, through hull fittings, steering, and switches are all rebuilt.
Steering wheel has Start, Trim and Fuel primer switches mounted in wheel spokes.
Additional weight mounts in front of gas tank and in nose.
2 inches of foam above and to the sides of the head area. I’m 5’6, and I still have over 2” of clear space between helmet and foam. 1 inch of foam behind head plus ½” of foam on sides of driver area.
Rock solid rough water boat.
Boat is real water tight.

Paint by Paul W. at ASI Freeland MI

I weigh 160 lbs and with 4lb in the nose and boat weighed in at 722 with 4 gallons of fuel so I added 5 ½ lb in front of fuel tank.

Sold with no trailer, power head, lower unit, radio, or AGM battery.
$7,000 invested. Tons of hours in labor. Make offer.
Can be seen at the next event in Kankakee, IL.

Gary Barber
989 684-7956
gbarber@chartermi.net