44XS base gasket

[John Schubert]

I need a 44XS base gasket. Please email jschubert19j@gmail.com if you have one & the cost.

[mercguy]

I need a 44XS base gasket. Please email jschubert19j@gmail.com if you have one & the cost.

You can buy them from Mercury John...

[25xs]

Maybe John's talking about the adapter housing gasket, basically a rectangle Part No. 14539, same as used on the 25XS tower/adapter mating surfaces.

John, pick out your part and part number from this picture & parts list and let us know.
https://www.crowleymarine.com/mercur...cfm?mdl=3UAYNQ

[John Schubert]

Tom,
Actually contacted Crowley not in stock. I just need the tower to pan to use as a template to make a wood base to ship a 44XS powerhead.

[25xs]

That should be Part No. 79650 (superseded to 796501) and about $15 shipped. Your local Mercury dealer should have them hanging on nails all over the back bench...

Here is the ebay search sorted cheapest first: https://tinyurl.com/y756e8pw

[mercguy]

Tom,
Actually contacted Crowley not in stock. I just need the tower to pan to use as a template to make a wood base to ship a 44XS powerhead.

I can probably scan it and email it to you John

[John Schubert]

You can buy them from Mercury John...

Daren or anybody. Is the 44XS stud pattern the same as the 30H/55H

[laddies]

No it's different.

[mercguy]

[QUOTE=John Schubert;n468516]

Daren or anybody. Is the 44XS stud pattern the same as the 30

pretty much, except for the back 2 studs

[John Schubert]

QUOTE=mercguy;n468309]

I can probably scan it and email it to you John[/QUOTE]
Please do Darren, can you do it tomorrow? Sorry for the rush but didn’t see your offer til now & need it to pick up the motor & ship.

[mercguy]

QUOTE=mercguy;n468309]

I can probably scan it and email it to you John

Please do Darren, can you do it tomorrow? Sorry for the rush but didn’t see your offer til now & need it to pick up the motor & ship.[/QUOTE]

Sorry John, I am out of town till Thursday....in Fondulac...

[DeanFHobart]

John,

Couldn’t you make a pattern from card / tag board that would be close enough for shipping box.... just saying.

All the best,

Dean Hobart..............

[John Schubert]

John,

Couldn’t you make a pattern from card / tag board that would be close enough for shipping box.... just saying.

All the best,

Dean Hobart..............

I could but don’t have the powerhead yet. Wanted to make it for transport from seller to my house then to pack & ship

[John Schubert]

Dean,
I would if the powerhead was here. I have to pick it up from the seller & wanted to have the base so I could transport the powerhead home then ship

[DeanFHobart]

Dean,
I would if the powerhead was here. I have to pick it up from the seller & wanted to have the base so I could transport the powerhead home then ship

10-4.... I’m sure you will figure it out... Cool.