Tweet
Where can these be bought and how much? Thx.
-
Fralick Racing
Like our Facebook Team page "Here" -
I was the supplier of the plates - I am out now - if their is demand I will run another batch - How many do you need ? poibly now around $ 15. US mailed to you .
-
Ok thank you. We have 7-8 25SSH in Ontario. I'm not sure who has a plate and who doesn't... I will try to figure it out and get in touch. Thanks.Fralick Racing
Like our Facebook Team page "Here"Comment
-
With the restrictor and height restriction do you think it will be competitive against the 20 SW? Trying to decide if it is worth bringing ours to the Nationals.
Comment
-
I think the 25 wont be competitive with the 20SW in the new configuration. I think that is what APBA wants too. We'll setup a 25SSH in CBF and continue that class likely in 2019. APBA drivers, let us know how much you want for your 25XS's
Fralick Racing
Like our Facebook Team page "Here"Comment
-
Re: Restrictor for 25xs
I'll take one, but need it middle of March preferably - is that doable?Comment
-
What is the general speed difference between the restricted 25XS and the unrestricted 25XS? I've seen some unrestricted 25XS's reaching 73MPH or so on a 1 mile course.John Mathews @ Mathews Racing L-390
Facebook: http://www.facebook.com/johnmathews390
Instagram: http://instagram.com/johnmathews_390
Twitter: http://www.twitter.com/johnmathews_390
Email: JohnMathewsL390@aol.com
Cell#: 318-794-4515Comment
-
GrandpaRacer, 68MPH with restricted engine and no height restriction? Just how fast are these Sidewinder 20's going now? Appreciate the answers. Curious as I have a couple of 25XS's I'd like to run with the APBA someday. -
I have no clue how fast the SW 20 is but the 25xs is now restricted and lower prop height than when I ran 25 xs, so it must be slower, maybe 63-64 as a guess. -
Pat and I have been running a 20SW on the west coast for 4 years in 20ssh. At West Virginia in 2016 I took 2nd in the nationals in 25SSH with 7 other merc guys. I nailed my starts and won the second heat, but Jeff Brewster probably had 3 MPH on me (and the rest of the field for that matter). Take that for what it is, but I think the 80s and restricted 25xs with the 20SW will probably be a decent combo. We'll see. John, bring that 25XS out and play! We already have 4 commitments from Y80 owners in region 10 for the new BSH class.
-
-
Plates now available-- I have talked with Alan @ Brown Tool and Machine , and he will now be the supplier for the 25 XS restrictor plates- We all know the quality he puts into his parts - It only makes sense that we support him - Please contact him in NJ for availability .
Comment
Comment