Needed - Merc. Clamp Bracket Screw Assy.

[prunk14]

im looking for a set of clamp screws. ive noticed the clamp bracket has a cast #MD 4625 -turns out the merc. Part#1400 - 21A 1. if anybody has a set or knows who i can contact it would be very helpful. Thanks Justin Farrell 88-S

[bill van steenwyk]

Check your PM's

[bh/]

Nothing wrong with what u have there, unless the threads in the clamp
are buggered, then u have to heli-coil them.
Back the two screws all the way out, trim off the damaged ends of the threads so a steel nut, the same thread, will screw on about four turns.
Then either get some one to MIG it, inside the nut, or gas braze it to the screw. Then use a wrench or socket to torque it onto the transom.
Much better than the OEM rubber handles, IMHO

[DeanFHobart]

Call Frank Erion

Call Frank Erion in Florida.... 269-720-1337.

[pav225]

Clamps

PM if interested in these. They are part #1427-814

Mike

[Old Timer]

If you can't find what your looking for send me an email I might be
able to help. You also need to be able to swedge the washers back on.
frannet@rochester.rr.com Old Timer