Unconfigured Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Inventory reduction sale..........

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Inventory reduction sale..........

    so, a little birdie (teammate/landlord/etc) says we (me) need to reduce some boat inventory and I agree with him!!! With my 3 new boats and his 3 new coming, that puts us at 20 boats..............WAY TOO MANY, so would like to reduce that number down to 15ish.........LOL!!!

    here are a couple I would like to move:

    Darneille CMH (true CMH or even a 125)...........has not been ran in over 5yrs..........been in dry heated storage since........... all Tietze hardware AND Tietze 102/302 Yamato mod tower........never wrecked..heck, its only been raced about 10 times..........SOLD SOLD SOLD

    Darneille DSH........this is the boat I have ran the last few years with a Tohatsu.........never been wrecked, but does have a couple battle scars that need repaint.........but, no big deal............could also possibly be used in DMH with a 44..............no throttle.................... SOLD SOLD SOLD

    here's a deal for Reg10 racers..............I will loan you either boat if you have a motor to use, but you must keep the boat/boats inside or under cover (out of the weather) and maintain them at your place..............you wreck em, you buy them.......!!!

    here's some pics when the boats were new.........

    also believe a complete Hoffman SST45 is for sale also................John will have to add the details on that.......
    Attached Files
    Last edited by mercguy; 03-18-2012, 03:36 PM.
    Daren

    ​DSH/750ccmh/850ccmh

    Team Darneille


    sigpic

  • #2
    Looks to me like you need a couple of carbon fiber boats in that stack of boats. Just so happens I know where you can get a couple!
    ...

    OMC FE/SE powerhead parts for sale. Kurcz ported block, Mod 50 pistons and cylinder head, exhaust, etc.



    Comment


    • #3
      how long and wide is the hydro with the engine on it ? also is it 4 point or 3 ?

      also do you have any large wrist pin rods still need 1 set for a merc 44 C.I.
      Pure of heart : Outlaw by nature

      "choice not chance determines destiny"

      "the race is never quite over , the course is never quite ours"

      how many years must a man pay for mistakes he did not make?

      here is a link of a little bit of Randy s racing history and a tribute to the late Ken Krier to learn more click the link

      http://www.boatracingfacts.com/forum...221#post107221

      Comment


      • #4
        Originally posted by RandY Aveline View Post
        how long and wide is the hydro with the engine on it ? also is it 4 point or 3 ?

        also do you have any large wrist pin rods still need 1 set for a merc 44 C.I.
        CMH......10'8".....36" bottom....78" afterplane......

        3pts, of course...............no rods right now......
        Last edited by mercguy; 03-15-2012, 07:26 PM.
        Daren

        ​DSH/750ccmh/850ccmh

        Team Darneille


        sigpic

        Comment


        • #5
          Originally posted by David_L6 View Post
          Looks to me like you need a couple of carbon fiber boats in that stack of boats. Just so happens I know where you can get a couple!
          I wish David, but I am not rich like you!!!

          ......maybe if you had a 20yr financing plan!!
          Daren

          ​DSH/750ccmh/850ccmh

          Team Darneille


          sigpic

          Comment


          • #6
            Me rich?

            I just work all the time. That's the reason that none of my stuff has been run much - I was at work instead of at the races.
            ...

            OMC FE/SE powerhead parts for sale. Kurcz ported block, Mod 50 pistons and cylinder head, exhaust, etc.



            Comment


            • #7
              Originally posted by mercguy View Post
              so, a little birdie (teammate/landlord/etc) says we (me) need to reduce some boat inventory and I agree with him!!! With my 3 new boats and his 3 new coming, that puts us at 20 boats..............WAY TOO MANY, so would like to reduce that number down to 15ish.........LOL!!
              CORRECTION: That would be 21 boats, not 20. And as a wise man once told me, everything is always for sale...for the right price!
              http://vitalire.com/

              Comment


              • #8
                inventory reduction sale

                So you found out how to be boat poor !!! LOL

                Comment


                • #9
                  Cmh..........

                  will also include an older style Tietze Yamato 102/302MOD tower (with driveshaft and pipe support bracket) with the boat, so you are almost there to running CMH............hell, I might even "loan" a 302mod pipe setup to a Reg10 racer, if bought from within the region............
                  Attached Files
                  Daren

                  ​DSH/750ccmh/850ccmh

                  Team Darneille


                  sigpic

                  Comment


                  • #10
                    Boats

                    Darren...your offer is very generous...If you provide the D stock hydro boat I will provide a rebuilt Tohatsu powerhead along with a prop for somebody interested in running D stock this year. The racer will need to provide a center section and lower unit along with a cowling, belly pan etc...all stuff readily available from Tohatsu or used from boneyards...would make a very inexpensive way for somebody to get a D stock rig to try out. Any takers?

                    Comment


                    • #11
                      Originally posted by daveracerdsh View Post
                      Darren...your offer is very generous...If you provide the D stock hydro boat I will provide a rebuilt Tohatsu powerhead along with a prop for somebody interested in running D stock this year. The racer will need to provide a center section and lower unit along with a cowling, belly pan etc...all stuff readily available from Tohatsu or used from boneyards...would make a very inexpensive way for somebody to get a D stock rig to try out. Any takers?
                      the "DSH" is "tentatively" sold and will be staying in Reg10...............as to your powerhead offer, I have top cowls (electric start only), belly pans, etc...............pretty much everything needed, except for center section and lower unit, that I would "loan" out also...........
                      Last edited by mercguy; 03-03-2012, 08:43 PM.
                      Daren

                      ​DSH/750ccmh/850ccmh

                      Team Darneille


                      sigpic

                      Comment


                      • #12
                        Dsh

                        Sounds like somebody could run the class very cheaply this year.....I would be stunned if somebody does not step up and go for it. First come, first served!

                        Comment


                        • #13
                          O man I'm doing 360s in my seat here ..... very tempting offer guys
                          ________________________
                          Stephen Armfield

                          CMH. 61R
                          Short Fuze Racing
                          Team Darneille
                          ALWAYS LOOKING FOR GOOD CMH PROPS FOR SALE
                          IF YOU HAVE ONE LET ME KNOW

                          Comment


                          • #14
                            Offer

                            Dont wait to long. I have got 3 pvt messages about it.

                            Comment


                            • #15
                              Originally posted by mercguy View Post
                              the "DSH" is "tentatively" sold and will be staying in Reg10...............as to your powerhead offer, I have top cowls (electric start only), belly pans, etc...............pretty much everything needed, except for center section and lower unit, that I would "loan" out also...........
                              Not a loaner but I have a new Bass tower and lower unit for sale. That would pretty much take care of everything.
                              ...

                              OMC FE/SE powerhead parts for sale. Kurcz ported block, Mod 50 pistons and cylinder head, exhaust, etc.



                              Comment

                              Working...
                              X