Looking for DSH prop castings

[daveracerdsh]

I am looking to purchase some prop castings....something on the line of 8 inch wide by 13 pitch.....Let me know if anybody has anything they want to part with. thanx

[mercguy]

I am looking to purchase some prop castings....something on the line of 8 inch wide by 13 pitch.....Let me know if anybody has anything they want to part with. thanx

let me know how this works out for ya...............I will take 6 myself!

[daveracerdsh]

Props

Don't really have any big secrets when it comes to props....I just want to get 2 copies of my best wheel. Maybe minor tweeks will work for new ones......

[mercguy]

Don't really have any big secrets when it comes to props....I just want to get 2 copies of my best wheel. Maybe minor tweeks will work for new ones......

let me borrow it for a couple days, so I can take some measurements.........

[Rocket]

Looking for DSH prop castings

Hey Daren sent you a PM

[daveracerdsh]

Props

Found a couple of castings...so far so good. Watch out boys! Here I come!

[james allen]

How about 7 1/2 " diameter with D prop shaft in the range of 12 to 14 pitch that have been polished but not thinned. I ran them on a quincy 'six' some years back
JIM

[Ron Hill]

8 X 13 Cleavers

I will be casting some 8 X 13 High Rake three blade cleavers in January. I've been told these casting have worked well on the Bass Tohatsu. He is the mold..I will post progress as I get the waxes made.

[daveracerdsh]

Props

Jim...can I take a look at the prop? And Ron.....what are you going to ask for the castings? That is the size I am looking for. Dave

[Rocket]

Looking for DSH prop castings

I have built two props from the hill castings, they came out good needed lots of grinding but rake and pitch was good.

[daveracerdsh]

Props

Sounds good.....what does Ron charge for blank castings?

[mercguy]

Dave

when will your new D be done???

[blueskyracer]

Yes Dave and were are the pictures?

[daveracerdsh]

New Boat

Been working on new boat quite a bit....composite bottom is in place, front 3 mil section also....have sponson formers and air traps glued in place, all framework for right sponson (it is pretty complicated) is glued down, need to fair it in. Working on left sponson Xmas day. I have a ton of pics, but got a new phone and for whatever reason I can't get it to send them to my e mail address.....same sim card etc...don't know what's wrong. Hopefully will be picking up 6 mil Okume from Ricky for the chines and the sponson running surfaces. Used composite for the cockpit sides, most of the bottom, sponson gussets etc. Looks like it is going to be fairly light...hopefully around 125lbs ready for hardware. If I could send pics to somebodies cell maybe I could get them forwarded to my e mail account. Dave

[seanp3]

Been working on new boat quite a bit....composite bottom is in place, front 3 mil section also....have sponson formers and air traps glued in place, all framework for right sponson (it is pretty complicated) is glued down, need to fair it in. Working on left sponson Xmas day. I have a ton of pics, but got a new phone and for whatever reason I can't get it to send them to my e mail address.....same sim card etc...don't know what's wrong. Hopefully will be picking up 6 mil Okume from Ricky for the chines and the sponson running surfaces. Used composite for the cockpit sides, most of the bottom, sponson gussets etc. Looks like it is going to be fairly light...hopefully around 125lbs ready for hardware. If I could send pics to somebodies cell maybe I could get them forwarded to my e mail account. Dave

Sounds like you're going to have to add lots of weight