steering cable

[26V]

I was in search of some more steering cable. I am currently using 1/8 coated Stainless steel. I ran across this site with some exceptional prices on galvanized steel cable. I decided to post the link here for anyone that is in the market for some steering cable
http://www.e-rigging.com/store_produ...Choice=Catalog

[26V]

more

so far here is about the best I have found for Stainless steel cable
http://www.pambinaimpex.com/servlet/...%22%2C+7x19+SS

[deverhart1]

Ive been using a type of non stretching rope from West Marine used for sailboat rigging. I don't have the name or the type as I am on vacation. But by using this I don't have any problems with the nylon being shed from the steel cable. I have used this for about 5 years with no problems. I change it about every other year. David Mason can probably give you the specs
David Everhart S52

[DeanFHobart]

Mylar Steering Cable

The white mylar steering cable is available from Portage Bay Systems, who is
an advertiser on this site. Steve Greaves, 206-371-0486.

Good Luck.

[spud62w]

I like to use 1/8" stainless wire rope without the plastic. I use these clamps to tighten it down. It will not move, Like the plastic coated wire will. You can find all this at McMaster Carr.

[blueskyracer]

Thanks for the post. I ordered 200 feet from e-rigging.

[DeanFHobart]

Steering Cable Clamps

I like to use 1/8" stainless wire rope without the plastic. I use these clamps to tighten it down. It will not move, Like the plastic coated wire will. You can find all this at McMaster Carr.

Spud,

Where do you get those style clamps??

Thanks,

Dean.............

[18W]

www.mcmaster.com/#wire-rope-loop-clamps/=b8dpy3