New Boats 2011

[blueskyracer]

Mike;

Sold the boat to Aussie Steve ! He is giving it a diet too !

I am on hold for know, the wife is going through some hard times with her Chemo ! Hope to get things together to put an 850 cc Mod H on the water next year (Bigger boat for us plus size guys !)

John B.

Sorry to hear about your wife. Steve already told me he had acquired your boat

[guedo499]

Plan A - CMH for 2011!
OR
Plan B - CMH for 2011!

[blueskyracer]

Plan A - CMH for 2011!
OR
Plan B - CMH for 2011!

Looks like this is becoming the up and coming class for 2011 in the west! John where did you get your pipe system?

[Aussie Steve]

Plan A - CMH for 2011!
OR
Plan B - CMH for 2011!

I like plan B

Steve A

[Trihedral_1]

Plan A - CMH for 2011!
OR
Plan B - CMH for 2011!

I'll give you a great deal on all three of my 102 motors. Will even throw in a few MK 30 blocks for good measure...

Jimi O. (305-R)

[guedo499]

Looks like this is becoming the up and coming class for 2011 in the west! John where did you get your pipe system?

Ummm, errr, well, that is yet to be determined..... small steps right now. Hey, look! Looks like I figured out the motor dilemma!

[blueskyracer]

Ummm, errr, well, that is yet to be determined..... small steps right now. Hey, look! Looks like I figured out the motor dilemma!

I guess then my next question to folks that frequent Hydroracer is who still makes complete pipe systems for the 102 and 302 with header pipe, brackets and filler block plus of course the pipe?? And I know Machined Components does not anymore.

John it does look like you have motors to choose from now with (3) 102's to pick from!

[mercguy]

Ummm, errr, well, that is yet to be determined..... small steps right now. Hey, look! Looks like I figured out the motor dilemma!

I will sell my 302mod...........$4000 CASH!!!!!!!!! No team discount!! Or..........my NEW (with BRAND NEW Tietze pipe setup) one for $5000!!!!! Step up to the plate..............

PS: will deduct $250 if you deliver my DSH and FEH to Larry Darneille for "repairs" this weekend........

PS: Lee would have kept making the Yamato MOD kits if someone would have set up their motor correctly and quit complaining about how it didn't work, when in actuality, it works AWESOME!!!!!!

[STEVE FRENCH]

I will sell my 302mod...........$4000 CASH!!!!!!!!! No team discount!! Or..........my NEW (with BRAND NEW Tietze pipe setup) one for $5000!!!!! Step up to the plate..............

PS: will deduct $250 if you deliver my DSH and FEH to Larry Darneille for "repairs" this weekend........

How much fer the tahotsu.....Darren?................. ....LUV ya BRO!!!!

Ya ....I've been in da........... lic-er ...cabinet!!!

Now if I could just Git David L-6 ta let go of his DMH/Altralite!!!!...................

How about a "team" effert?.....David's L-6 rig...yer to-hat-su.....me drive'n????............ 100N>>>

[propnuts]

It is really tempting

Watching John Maroney and Darren and some of the other guys running C mod it looks like a pretty fun class to get into. If someone made a full conversion kit (HINT HINT all you machinists out there) I think MGR might be in the mix too.

I guess then my next question to folks that frequent Hydroracer is who still makes complete pipe systems for the 102 and 302 with header pipe, brackets and filler block plus of course the pipe?? And I know Machined Components does not anymore.

John it does look like you have motors to choose from now with (3) 102's to pick from!

[guedo499]

Watching John Maroney and Darren and some of the other guys running C mod it looks like a pretty fun class to get into. If someone made a full conversion kit (HINT HINT all you machinists out there) I think MGR might be in the mix too.

Reg 10 might just explode with new CMH this year: you not included, I know of three other individuals (none of which include the Byrnes!) who are more than just interested.

I put a call into Lee Tietze but got a machine. I know when I checked in last year the kits were $1000 plus $50 for the lower unit nose cone. Not a bad deal. Once I hear from Lee first hand, I'll let you know what is what but it is not too far fetched to assume there was just a lack of demand.

A the very least, I'll be buying two or three kits; perhaps someone will come up with a common sense, tip-top solution so we don't have to re-create the wheel.

A doctor friend of mine once told me he knew the answer to everything - Money.

I wonder how many people are wishing I am saying the CC name rather than CMod Hydro?

[mercguy]

How much fer the tahotsu.....Darren?................. ....LUV ya BRO!!!!

Ya ....I've been in da........... lic-er (faster)...cabinet!!!

Now if I could just Git David L-6 ta let go of his DMH/Altralite!!!!...................

How about a "team" effert?.....David's L-6 rig...yer to-hat-su.....me drive'n????............ 100N>>>

my #1 Nationals Tohatsu.....$6500..................#2 Region raced motor.........$6000................also have #3 in the works to be built..............ya, David outta send that Altralite MY way...........

[seanp3]

[QUOTE=guedo499;168577]Reg 10 might just explode with new CMH this year: you not included, I know of three other individuals (none of which include the Byrnes!) who are more than just interested.

QUOTE]

Dan and I were talking about that idea just yesterday....

[blueskyracer]

[QUOTE=guedo499;168577]Reg 10 might just explode with new CMH this year: you not included, I know of three other individuals (none of which include the Byrnes!) who are more than just interested.

I put a call into Lee Tietze but got a machine. I know when I checked in last year the kits were $1000 plus $50 for the lower unit nose cone. Not a bad deal. Once I hear from Lee first hand, I'll let you know what is what but it is not too far fetched to assume there was just a lack of demand.

A the very least, I'll be buying two or three kits; perhaps someone will come up with a common sense, tip-top solution so we don't have to re-create the wheel.

A doctor friend of mine once told me he knew the answer to everything - Money.



I talked to Lee quite a while at Eatonville and he said there was not enough demand for the pipes and he also had lost the pipe builder he use to use. Good luck and let us know what you find out.

[mercguy]

Watching John Maroney and Darren and some of the other guys running C mod it looks like a pretty fun class to get into. If someone made a full conversion kit (HINT HINT all you machinists out there) I think MGR might be in the mix too.

Tony, Dudley Malone can hook you up with the needed parts. Also, Steve Benson can build the pipes.........so, if you want it bad enough.....its there!!!!!!!