Lower units

[Ron Hill]

Gear Ratio on The New Hatchet??

What is the gear ratio on that new hatchet?

[bh/]

Run Konny units all the time never had a grear problem ???? who has

Pat

We put a bunch of hours on a 15:16 Konny under a 497"
with a reduced diameter drive shaft, with no obvious wear.
Can only imagine they would last for years under a 40/44".
Maybe the new 1:1 gears are giving problems?
Would like to hear Steve chime in on this.

[raceright]

We put a bunch of hours on a 15:16 Konny under a 497"
with a reduced diameter drive shaft, with no obvious wear.
Can only imagine they would last for years under a 40/44".
Maybe the new 1:1 gears are giving problems?
Would like to hear Steve chime in on this.

Check out Konny's web site you can get to it through the USTS site..
There ratio's are listed in there lower unit section as well as euro pricing
all are available relatively quickly as they have there own gear making machine (machinest types call it something else) if you need to know more private message me

Pat Wright

[Art K]

Lower units

Was told by Steve L. that Konny has a gear problem. Do not know if that applys to any other than the 1 tooth off or not.
Art K

[raceright]

Was told by Steve L. that Konny has a gear problem. Do not know if that applys to any other than the 1 tooth off or not.
Art K

Ok news to me have mostly 14/15's under 500's and 700's 4 are new model and 4 are old model, change oil after every race 700 tacks at 12,600
500 13,500 been ok with me has any other driver run konny's and had problems would like to know? konny' sells more units in europe than anyone else I believe
also have several very good Rossi units 12/15 12/14 all are very good

Pat

[SAWYER]

check pm

I sent you a pm

[SAWYER]

I have Konig 14:15 and 14:14 units I would sell. $750.00 for the 14:15, $800 fot the 14:14.

Rex Hall

I sent you a pm