Building racks in an enclosed trailer

[Herb Lanphear]

Has anyone got information regarding what works best, and where to purchase it with regards to the installation of bunks(2)for boats, in an enclosed trailer. Any idea's and assoc pictures would be appreciated greatly.

[sponsonhead]

From the archives

Herb,

Check out this old thread:

http://www.hydroracer.net/forums/sho...light=enclosed

R-19

[Howie Nichols]

Saved a bunch of pics from different threads to get ideas for our trailer. Send me your email Herb and I can sned them your way.

We used a square street sign post to make ours so they could be adjustable in 1" increments without lots of drilling...

[Matt Dagostino]

Steve Dunn

Give Steve a call............he built Mel Thomas's bunks and made a cool swinging motor rack for Mel's 7x14 trailer!!

Number is 843-455-1393.

[Herb Lanphear]

Thanks all of you for the info, my email is hlgl@bellsouth.net, and I will hopefully have something done before Tabor City(you all know how much I like that place, either checkered flag or red flag no mid ground)

[guedo499]

Pics

Howie, would you be so kind to send me the pics you have? I bought a 40' long, 9' high sides enclosed trailer last year, but can't seem to figure out what to do in it.

Thanks, John jp(at)johnpeeters.com

[R13racer]

I had this same question last year. Here are some pictures of what we built. Round tubbing inside of round tubing so they swing out of the way at the race. It is not shown in the picture but was tie off from the end of the horizontal bar to the other upper corner of the trailer. Just to even out the load a bit. This trailer is extra tall so we were able to stack 3 high, even with the capsule. Zach Malhiot

[Bill Tetro]

Racks

I have a complete set of folding racks that I am taking out of my trailer.
Call me . Bill Tetro 321-794-2519