Official Roll Call for Evans, GA- South East Divisionals

[rball82]

Csr

[QUOTE=Howie Nichols;202808]Any other CSR that are coming?? I have 3 possible's from the Northeast that would like to make the trip if we have enough....


Jerry, yes testing will be available Friday.[/QUOTE

Add 1- CSR for me. Driver to be determined.

[crfabbro2F]

Pick me!

[rustnrot]

Hi, Tom Lang, Augusta, GA here. This is wonderful! I just now found out about this.

I don't have a boat to run in this but am an enthusiast and offer my services if you need a volunteer. I have been a Pit Boss for the Classic Raceboat Association in Florida for several years. Let me know if you need any assistance.

[rball82]

Chris

Pick me!

Chris. Thanks for the reply. I do have a driver in place but may have another rig ready to go by this weekend. May need your motor, will let you know by Wednesday.

[jon66w]

I am bringing my race trailer and DeSilva CSR 66F, both for sale, over to Evans Friday afternoon. Anyone who has a 302 that won't be used in CSR is welcome to put on boat and use in race. We've got to get more CSR in races here to sustain class. This would be a cheap way to increase the numbers.

I AM STILL OFFERING MY RACE TRAILER FOR SALE. START OFF 2012 SEASON WITH AN EXCELLENT, EASY TOWING TRAILER. I HAVE OVER $2000 PLUS MY LABOR INVESTED BUT I NEED ROOM AND WILL LISTEN TO ALL REASONABLE OFFERS. BELOW IS DESCRIPTION AND PIX. LETS DEAL !! WILL DELIVER FOR FREE 200 MILE RADIUS, $0.30/MILE OVER 200 MILES.
JON K WALTERS 706-467-9007

DESIGNED AND BUILT BY ME. ALL WELDED TUBULAR STEEL BOX SHEATHED IN ALUMINUM SHEET AND LINED WITH ¼” PLY. DECK COVERED IN ¾” EXT. PLY BOLTED TO FRAME. FULL STOP/TAIL LIGHTS AND ALL CLEARANCE LIGHTS. REAR DOORS ARE WELDED TUBULAR STEEL WITH ALUMINUM SHEET ON OUTSIDE AND PLY ON INSIDE WITH SHELVES INSIDE. DOORS HUNG ON HEAVY DUTY WELDED ON CARGO TRAILER HINGES. BOAT RACKS ARE WELDED TUBULAR STEEL WITH CARPETED 2x6’S. TOP TWO RACKS CANTILEVERED WITH LEFT SIDE VERTICAL REMOVEABLE WITH 3 LARGE HITCH PINS. TWO BACK BOX STABLIZER FEET ADJUSTED WITH LARGE HITCH PINS. SINGLE AXLE WITH NEW SPRINGS AND BEARINGS. TWO NEW ST 205/75/R14 TIRES AND FULL SIZED SPARE. WILL CARRY UP TO 4 RUNABOUTS 14’ OR LESS. BOX HAS TWO SWING OUT RACKS, WELDED TUBULAR STEEL PIVOTED ON TUBE SUPPORTED TOP AND BOTTOM ON BRONZE BUSHINGS. EACH CAPABLE OF HOLDING TWO 4 CYLINDER MERCS. REMOVABLE HYDRAULIC JIB CRANE BOLTED TO BOX ROOF TO LIFT MOTORS FROM RACKS TO BOAT IF YOU’RE OLD LIKE ME WITH BAD BACK. SWING UP FRONT DOLLY WHEEL. ALL IN EXCELENT CONDITION. ASKING $2000 WHICH IS LESS THAN I HAVE INVESTED. JON K WALTERS 706-467-9007

[Bob Dunlap]

Hi, Tom Lang, Augusta, GA here. This is wonderful! I just now found out about this.

I don't have a boat to run in this but am an enthusiast and offer my services if you need a volunteer. I have been a Pit Boss for the Classic Raceboat Association in Florida for several years. Let me know if you need any assistance.

Come on Tom we will put u to work.

[Danny Pigott]

Tom, you never know somebody might come up with a boat for you to take a ride in. Thanks for offering the help we will really like it Thanks.

[rustnrot]

Doubt I want a ride, but my friend Mark wants a boat hull for display. He is looking for an old one, or out of service, or even wrecked. What have you got?

[Scott Deware]

Anyone from the North East going that would have room for a JH on their trailer?

[rball82]

Csr

Chris. Thanks for the reply. I do have a driver in place but may have another rig ready to go by this weekend. May need your motor, will let you know by Wednesday.

Chris. I will not have my other CSR ready, sorry.

[capnmark]

Had an out-of body expierence at my first race ever in new 94-N boat today. Met many racers willing to help an unprepaired rookie have a great time with his daughters. Special thanx to Tom Cronk and company taking time to set my 80 up!