Tweet
I provided 25ss info to you in this post
http://www.hydroracer.net/forums/sho...t=15632&page=2
One important issue I failed to note is to never recoil over this engine with plugs removed unless they are grounded. Otherwise the CD box can be damaged. I installed a kill switch on this engine by sending the correct wire from the CD box to ground when pulling over without plugs. This especially important if motor dumped and ridding of water, etc.
With the kill switch there is a double wire plug that is connected to the engine that I connect the kill switch lead to. When recoiling this engine over without plugs I just place a jumper wire across the double wire plug at the engine or activate the kill switch at the dash.
PM me if you want the details of the kill switch connection at the engine.
Pete
psushinsky@cfl.rr.com
http://www.hydroracer.net/forums/sho...t=15632&page=2
One important issue I failed to note is to never recoil over this engine with plugs removed unless they are grounded. Otherwise the CD box can be damaged. I installed a kill switch on this engine by sending the correct wire from the CD box to ground when pulling over without plugs. This especially important if motor dumped and ridding of water, etc.
With the kill switch there is a double wire plug that is connected to the engine that I connect the kill switch lead to. When recoiling this engine over without plugs I just place a jumper wire across the double wire plug at the engine or activate the kill switch at the dash.
PM me if you want the details of the kill switch connection at the engine.
Pete
psushinsky@cfl.rr.com