Tweet
Johnson Evinrude Ficht Diagnostic Software Version 1.42b
** If you want a softcopy of the manual please send me an email. **
yannick_bouchard@hotmail.com
This program works on all Ficht equipped V4 and V6 outboards model year 2002 and older. It may work on some 2003 models (not test yet).
The Ficht Diagnostic Software will operate on any laptop or desktop computer running a Microsoft (windows) based operating system, you only need a DOS window.
The kit includes the Ficht software 3.5" diskette or CD. The user manual and the cable connecting the computer to the motor. The cable connects to the computer through a D-sub 9 pin connector (10 feet long). This kit is a must for working on Ficht equipped outboards.
This program aids the user in solving service problems. This software allows a user to:
-Actuate individual fuel injectors
-check spark on individual cylinders
-test oil injector operation run the electric fuel circulation pump
-perform cylinder drop tests
-display real-time sensor values and system voltages
-display switch conditions and engine performance parameters
-verify engine and computer timing
-retrieve and clear stored service codes
-display ac***ulated engine hours
-display recorded engine hours within six operational RPM ranges
-initiate a replacement powerhead oil break in program
-print and save service repoert
-install service replacement ECU/EMM
Price = 60$ , [Shipping included everywhere]
*Paypal payment for your protection.
Please contact me with any questions.
yannick_bouchard@hotmail.com
msn id = yannick_bouchard@hotmail.com
** If you want a softcopy of the manual please send me an email. **
yannick_bouchard@hotmail.com
This program works on all Ficht equipped V4 and V6 outboards model year 2002 and older. It may work on some 2003 models (not test yet).
The Ficht Diagnostic Software will operate on any laptop or desktop computer running a Microsoft (windows) based operating system, you only need a DOS window.
The kit includes the Ficht software 3.5" diskette or CD. The user manual and the cable connecting the computer to the motor. The cable connects to the computer through a D-sub 9 pin connector (10 feet long). This kit is a must for working on Ficht equipped outboards.
This program aids the user in solving service problems. This software allows a user to:
-Actuate individual fuel injectors
-check spark on individual cylinders
-test oil injector operation run the electric fuel circulation pump
-perform cylinder drop tests
-display real-time sensor values and system voltages
-display switch conditions and engine performance parameters
-verify engine and computer timing
-retrieve and clear stored service codes
-display ac***ulated engine hours
-display recorded engine hours within six operational RPM ranges
-initiate a replacement powerhead oil break in program
-print and save service repoert
-install service replacement ECU/EMM
Price = 60$ , [Shipping included everywhere]
*Paypal payment for your protection.
Please contact me with any questions.
yannick_bouchard@hotmail.com
msn id = yannick_bouchard@hotmail.com